AXT, Inc. Aktie

Good afternoon, everyone, and welcome to AXT's Third Quarter 2026 Financial Conference Call. Leading the call today is Dr. Morris Young, Chief Executive Officer; and Gary Fischer, Chief Financial Officer. In addition, Tim Bettles, VP of Business Development, will be participating in the Q&A portion of the call. My name is Tracy, and I will be your coordinator today. I would like to now turn the call over to Leslie Green, Investor Relations for AXT. Leslie, please go ahead.

Thank you, Tracy, and good afternoon, everyone. Before we begin, I would like to remind you that during the course of this conference call, including comments made in response to your questions, we will provide projections or make other forward-looking statements regarding, among other things, the future financial performance of the company, market conditions and trends, emerging applications using chips or devices fabricated on our substrates, our product mix, global economic and political conditions, including trade tariffs and import and export restrictions, ability to obtain China export permits, timing and receipt of export permits, our plan to list our subsidiary, Tongmei in Hong Kong, the closing of the intended investment into Tongmei by a leading Asia-based asset manager our ability to increase orders in succeeding quarters to control costs and expenses, to improve manufacturing yields and efficiencies or to utilize our manufacturing capacity.

We wish to caution you that such statements deal with future events, are based on management's current expectations, are subject to risks and uncertainties that could cause actual events or results to differ materially. In addition to the matters just listed, these uncertainties and risks include, but are not limited to, the financial performance of our partially owned supply chain companies and increased environmental regulations in China. In addition to the factors just mentioned or that may be discussed in this call, we refer you to the company's periodic reports filed with the Securities and Exchange Commission. These are available online by link from our website and contain additional information on risk factors that could cause actual results to differ materially from our current expectations.

This conference call will be available on our website at axt.com through October 29, 2028. I also want to note that shortly following the close of market today, we issued a press release reporting financial results for the third quarter of 2026. This information is available on the Investor Relations portion of our website at axt.com.

I would now like to turn the call over to Gary Fischer for a review of our third quarter results. Gary?

Thank you, Leslie, and good afternoon to everyone. Our financial results highlight the continuing inflection in our business trajectory and the early stages of a multiyear growth phase for AXT. Revenue for the third quarter of 2026 was $73.4 million. This is an increase of 54% from $47.6 million in the second quarter of 2026 and an increase of 162% from $28.0 million in the third quarter of 2025. To break down our Q3 '26 revenue for you by product category, indium phosphide was $54.3 million, primarily from data center applications. Gallium arsenide was $9.1 million, germanium substrates were $344,000.

Finally, revenue from our consolidated raw material companies in Q3 was $9.7 million. The top 5 customers generated approximately 35% of total revenue and 1 customer was over the 10% level. Gross margin showed continued gain in the third quarter, driven by an increase in total volume and a favorable product mix. In addition, market prices for indium phosphide have increased and a shift from 3-inch to 4-inch wafers has also contributed. Morris will give more color on this in a moment.

Non-GAAP gross margin was 56.1% compared with 45.0% gross margin in Q2 and 22.4% gross margin in Q3 of 2025. For those who prefer to track results on a GAAP basis, gross margin in the third quarter was 56.0% compared with 44.9% in Q2 and 22.3% in Q3 2025. Moving to OpEx. Our total non-GAAP operating expense in Q3 was $11.7 million compared with $10.2 million in Q2 and $6.7 million in Q3 of 2025. On a GAAP basis, total OpEx in Q3 was $12.7 million compared with $10.9 million in Q2 of 2026 and $7.3 million in Q3 of 2025. Our non-GAAP operating profit for the third quarter of 2026 was $29.5 million or 40.2% of revenue compared with a non-GAAP operating percent in Q2 of 2026 of $11.2 million and a non-GAAP operating loss of $384,000 in Q3 of 2025.

For reference, our non-GAAP operating line for the third quarter of 2026 was a profit of $28.4 million or 38.7% of revenue compared with an operating profit of $10.4 million in Q2 and an operating loss of $1.1 million in Q3 of 2025. Nonoperating income and expense and other items below the line of the operating line for the third quarter of 2026 was a net loss of $2.7 million. The details can be seen in the P&L included in our press release today. We are pleased to report a non-GAAP net profit of $26.8 million or $0.41 per diluted share. This compares with a non-GAAP net profit of $11.9 million or $0.19 per share in the second quarter of 2026. Non-GAAP net loss in Q3 of '25 was $1.2 million or $0.03 a share. On a GAAP basis, net profit in Q3 was $25.7 million or $0.39 per diluted share. By comparison, net profit was $11.1 million or $0.17 per share in the second quarter of 2026. GAAP net loss in Q3 of 2025 was $1.9 million or $0.04 per share.

The weighted average diluted shares outstanding in Q3 was 65.9 million. Cash, cash equivalents and investments increased by $77 million to $825.9 million as of September 30. By comparison, at June 30, it was $748.8 million. Accounts receivable increased by only $3 million. In Q3, DSO improved to 49 days as a result of multiple customer prepayments. During Q3, we signed a long-term supply agreement with Lumentum. Under the terms of the agreement, we received a prepayment for wafers of $43.5 million. This type of agreement with significant upfront cash is an additional signpost regarding the important use of indium phosphide for high-speed optical data transmission required in the AI data centers. This prepayment is posted on our financial statements as a liability and will be converted to revenue as we ship products against the agreements.

Depreciation and amortization in the third quarter was $2.6 million. Total stock comp was $1.1 million. Net inventory was up by approximately $7.4 million in the third quarter. This concludes the discussion of our financials. Before I turn the call over to Morris, I want to note that yesterday, we announced that our majority-owned subsidiary, Tongmei, has entered into a definitive agreement for a private equity financing, selling its own shares, not AXTI shares, to provide RMB directly into its operations. This is an exciting milestone for Tongmei as it works towards a public offering on the Hong Kong Stock Exchange. Funds will be used to advance capacity expansion for indium phosphide wafers at a time when demand for these wafers is outpacing supply.

Proceeds will also be used to increase capacity at our raw material companies in China. Assuming the maximum amount of the investment at USD 545 million, AXT will maintain control of Tongmei with approximately 73.4% ownership, down approximately 12.1% following the completion of the transaction. This transaction turns the spotlight on Tongmei, reflecting its substance and generating momentum towards the future. And finally, as previously stated, Tongmei is proceeding with its efforts towards a listing on the Hong Kong Stock Exchange. We continue to believe that an IPO in China is highly beneficial as expanding both the substrate and raw material capacity in China is the most efficient way to support the rapidly evolving AI infrastructure build-out. Okay. Thank you. With that, now, I'll turn the call over to Dr. Morris Young for a review of our business and markets. Morris?

Thank you, Gary. This is a pivotal and exciting period for AXT. As Gary noted, our business has reached an inflection point driven by exceptional strong customer demand for our indium phosphide material, which seems to increase with every review cycle. We entered 2026 with a commitment to double our indium phosphide capacity, and I'm pleased to report that we surpassed that goal in August and continue our expansion as an ongoing effort. We are currently in the design phase of converting a newly acquired adjacent building for indium phosphide production with work expected to begin within the next several months. Even with more significant events, our revenue opportunity in indium oxide has more than quadrupled in 2026 from where we were coming into the year. We were expecting substantial additional node expansion also in 2027.

Three developments are fueling this progress. First, as I mentioned, we are aggressively adding capacity to address the massive market opportunity. Second, new proprietary crystal growth furnace designs are delivering meaningful gains in manufacturing productivity and output. Third, customers are transitioning to large diameter substrates and higher-value products. Together, these developments are creating a step change in our revenue potential. We have well surpassed our historical record levels for both indium phosphide revenues and corporate revenues. We are in a brand-new territory with backlog now above $500 million, including long-term multiyear agreements, short-term contracts of less than 12 months and spot purchase orders. Demand remains ahead of supply even as we accelerate the pace of our capacity addition.

According to AI data center market, the need for optical connectivity is growing rapidly. As hyperscalers deploy increasing GPU dense systems, they require faster, more powerful efficient photonics to move enormous volume of data. Today, the transition to 800G and 1.6T transceiver modules is generating strong demand for indium phosphide-based lasers and detectors that enables these high-performance optical links.

Looking further ahead, the industry is moving towards near packaged and co-packaged optics, which should expand the role of our material even further. Taken together, these developments support a sustained build-out of high-density optical infrastructure and a multiyear growth opportunities for our indium phosphide business. As many of you are aware, the competitive landscape for high-quality indium phosphide is limited to just a few players due primarily to the very high technical barriers to entry and the ongoing difficulty and sensitivity of crystal growth and proprietary processes technologies.

Among our peers, we believe AXT is in the strongest position to scale our business for massive industry growth while continuing to meet the most stringent performance requirements for high-speed data center AI connectivity. Case in point, we continue to make great strides in development of our 6-inch indium phosphide capability. Our 6-inch lines are now moving to power production status with productivity increasing steadily. We believe this further differentiates us from our field of competitors and put us in a leadership position for next-generation devices.

I want to thank our customers who are partnering with us throughout this process. We're excited to support them as we move forward with our own capability. Looking at demand by region, the large-scale build-out of AI infrastructure in the United States as well as in the significant capital investment plan for cloud services and AI platform providers is driving strong demand for EML and silicon photonics-based optical transceivers and high-speed total detectors with developing demand for CW lasers for scale-up applications. We believe our materials are already deployed across multiple U.S. hyperscalers, and we expect adoptions among the customers to continue to expand.

China is also emerging as an important growth market as it accelerate investment across the AI supply chain. Our revenue into China indium phosphide-based laser market increased strongly at the end in Q3, and all of our customers there remain on our location. This momentum reflects China's growing role in building AI infrastructure for the global market and represent a compelling opportunity for AFC, particularly because shipments within China do not require an export license.

Turning to gallium arsenide. Several of our key customers are now showcasing slow and wide VCSEL lasers for data center applications based on both 6- and 8-inch gallium arsenide. We believe this can be an exciting future market for AXT, and we are in a pole position as the world leader in both 6- and 8-inch gallium arsenide substrates. In Q3, demand for both semi-insulating and semiconductor material across wireless devices, industry robotics and data center lasers applications grew sequentially from the prior quarter. We do expect several of them to be seasonally down in Q4 but we continue to see opportunity for market share expansion in the continuing year for our gallium arsenide substrates.

Finally, our raw material business continue to be highly strategic to our growth plan. Our subsidiary, Jin Mei, is now refining high-purity Indian, which gives us direct control of a guaranteed supply of yet other critical material for our indium phosphide substrates. We're also investing to help Jin Mei to expand their capacity so that AFC can depend on them on our growth. Jin Mei will continue to provide a meaningful portion of our raw material requirements. We'll continue to invest in our portfolio as we believe it is a major competitive differentiator.

In summary, AXT is operating from a position of growing strength at an important moment for our industry. Demand for indium phosphide continues to exceed supply, and we're moving quickly to expand our capacity, improve our productivity and advance large diameter substrates. We always believe that indium phosphide will represent a big opportunity for AXT, but I can honestly say we didn't expect it to be so big. We're happy to see it, and we are also humbled by it. Through the years, we have created a great product to serve the market. As I have said, we are stepping up to embrace this massive opportunity. We are off to a fantastic start and remain laser-focused on execution. We believe we are well positioned for transformational growth as our market continues on its extraordinary trajectory.

With that, I will turn the call back to Gary for our fourth quarter guidance. Gary?

Thank you, Morris. As of today, we have approximately $90 million in revenue that can be realized in Q4 across our substrate product lines and raw materials for which we either already have a permit to ship or for which a permit is not required. We have a high degree of confidence in recognizing this revenue in Q4. We have delivered strong gross margin improvement over the past several quarters and are very pleased with the progress. Further improvement depends on a number of factors, including total revenue as it relates to revenue mix by product, absorption of fixed costs and our ability to continue to drive better manufacturing efficiency.

With regards to operating expense, we expect that it will be approximately $13 million in Q4 on a non-GAAP basis and approximately $14 million on a GAAP basis. With these factors in mind, we believe our non-GAAP net income will be in the range of $0.57 to $0.59 and GAAP net income will be in the range of $0.56 to $0.58. We estimate the share count for Q4 will be approximately 66.1 million shares. Okay. This concludes our prepared comments. We will be glad to answer your questions now. Tracy?

[Operator Instructions] Your first question comes from the line of Richard Shannon with Craig-Hallum.

I'll congratulate you guys again on another very strong quarter, keep up the great work here. My first question is on gross margins. We've had a discussion in the last few conference calls, particularly the last one about how high they could go and you were suggesting they could get above 50%, and you cleared that significantly here. Gary, you gave us a little bit of language here how to think about it going forward. I didn't have enough time to run through your guidance-driven model to see where this might be aiming here. So I'd love for you to discuss gross margins, particularly in the context of what's built in your guidance up, down, flat as well as whether it can go up meaningfully from here. And maybe if you can maybe touch on some dynamics here about the things that you touched on the call here like wafer diameter increases here to the degree to which you have customers or contractors or spot pricing, ASP trends, et cetera. If you could help us kind of delineate all that, that would be great.

Yes. We thought about this in advance, and I'm glad to make comments and Tim and Morris are prepared to add a little more depth and color. As usual, the gross margin is hugely driven by volume. which we've always said, and it's hugely driven by mix. And by that, we mean that since indium phosphide is a profitable product for us, the more indium phosphide we have, the happy we are in terms of gross margin prospects. So those are the 2 baseline variables that are fundamental. Now as we look at the recent developments, we're also looking at productivity improvements. And what I would say, and I have a manufacturing background, but good manufacturing companies should improve if volume goes up because you get a larger database, you can use statistical process control from a larger database to modify your processes.

And our business model is extremely intensive in terms of process technology and process steps. So these higher volumes are helping us become more efficient. So that's a third element besides volume and mix. A fourth element that you also listed is customers moving to higher value, larger diameter substrates. So what's happening is that we have a history of migration. When Morris started the company, the wafer size for gallium arsenide and indium phosphide was 2 inches. And over the decades, we've migrated to 3-inch, 4-inch and in the case of indium phosphide, we're now moving to 6-inch.

As we move up because there's more real estate in a 4-inch than there is in a 3-inch, obviously, the price goes up, but it just opens up a dynamic in which the customer expects the price to go up. So it's not surprise. And so then it's easy to agree on a fair price. So the larger diameter substrates also have a higher ASP, which becomes another element. So 6-inch right now is not impacting much, but next year, it will. So let me have Tim and/or Morris fill in some of the blanks here.

Yes. I want to add a few points on productivity as well. Morris mentioned that we're moving to a new generation of crystal growth furnace. This has been bought out really for the development and manufacturing of 6-inch indium phosphide. What we're seeing with this new technology is a significant increase in productivity as we move forward. So it not only enables us to move more efficiently from 2-inch to 3-inch and then 3-inch to 4 and eventually 6. But as we do that, it gives us much greater productivity in doing so. So that's going to help the gross margin significantly as we employ more and more of these new generation furnaces. It's really going to set us apart from the competition and give us a massive lead in on this technology.

Yes. So let me add to add a point. I think one of the things which we saw a significant customer yesterday, and they were asking us on the much better EPD requirement on their high-power laser. And that is music to our ears. In other words, low EPD is our forte. And if they have a higher requirement for lower EPD, then there's less competition and that's a premium to the price. So that adds to our gross margin, okay? And also is the larger diameter 6-inch, of course, when we first were to ramp, we do expect productivity or yield to be low. But as we add more furnaces, we expect the yield improvement to expand significantly going forward.

And lastly, but perhaps not very significant is the raw material prices going up significantly. So we're going to have some deduction on that side. But I think as you sum up all the other things that we're gaining, our efficiency, productivity, low EPD, et cetera, et cetera, it overwhelms the increase in our raw material costs.

So Richard, one more thing. I guess I would say, I mean, you and I have known each other for even longer than I've been in my 12.5 years at AXT, but you probably never would expect me to say something like this on an open call, but I do think our gross margin will go up some more. I don't think we've peaked -- and I think it's reasonable to expect that it could begin with a 6 in the next quarter, not a high 6, but all of the things that we just described in terms of efficiency and migration and sizes and things like that, it's a work in progress. And so it should have a natural effect.

Let me ask one more question and I will jump on the line here, and that's on the capacity. It sounds like you had some great progress in expanding capacity faster than expected. You asked a question on the last call about what your indium phosphide revenue potential will be exiting both this year and last year. And if I wrote down the numbers correctly, where did I put those things? I forgot what they are, but I think they were like maybe 60 and then 130 each of the next few years. It sounds like it's a lot higher than that. Can you quote what your expected potential indium phosphide revenue capacity is exiting this year and next?

Yes. I can give some idea on that. It is a lot higher than we projected recently, of course. And that's in part because of this migration to larger wafer sizes. And it's also in part to an increase in ASPs. And we've been building out an ASP plan as we move forward. In Q3, we recorded an indium phosphide revenue of $54.3 million, and that's probably going to go up in Q4. Total projection of Q4 being around the $90 million mark, I would anticipate that the split of indium phosphide, all of the growth is going to be indium phosphide. So you should probably think about adding all of that additional on to indium phosphide. And then we'll just see continued growth into next year.

Your next question comes from the line of Charles Shi with Needham.

Gary and Tim, I think this is probably a high-level question because from time to time, there are some chatters within the investment community, they have a view on where things are going. And the most recent thing seems to be that they are worried about AXT adding a good amount of capacity and that could lead to overcapacity for indium phosphide substrates next year. I'm not sure if I buy that because it kind of mimics what we heard about HBM overcapacity into late 2024. It's a high-growth market and supply is getting a little bit ahead. I don't think that really is a big worry. But -- you guys know the forecast, customer forecast. You guys have intelligence into what your competitors are doing. You guys know what you are doing, how much capacity is going to be added. Mind if you address this question here and provide us your insight on this whole supply-demand situation maybe into next year.

Yes. Charles. So as we stand right now, we are significantly overbooked. All of our customers are on allocation. And the market out there, every month, we see additional growth. As we look at our capacity moving into '27 and then beyond into '28, the opportunities for us here and the demand for us outstrips any capacity that we can put in place. So the demand is just growing faster than we can add capacity today. We're seeing this, as we've pointed out, Morris has already pointed out with long-term multiyear agreements, short-term contracts of 12 months or less and then spot orders. Again, every customer is on allocation right now. It is impossible to keep up with demand. Even long-term supply agreements that we're having off of customers, we're being asked to increase 2x or 3x.

So the plans that we have to, again, double our capacity in 2027. I'm not sure we'll even get our head above water with 2027. I can tell you as far as competition goes, I think -- I believe that we are still the leaders out there. We are certainly one of the fastest to grow capacity on indium phosphide. But Morris has just made an excellent point, and we've been saying this for years. Our low EPD substrates give us a massive value proposition advantage against our competition. As product moves towards high-power CW lasers and UHP lasers for scale out and scale up, low EPD, low defect density is absolutely essential for high laser bar yields and high reliability. And AXT offers the world-class in that marketplace.

So customers are turning to us not only because we're the fastest to build out capacity, they're turning to us because our value proposition model is stronger than anyone else's. So worries about adding capacity through next year? No, I don't have any.

Yes. Well, so let me add a few points. So let me give you an angle from the Chinese competitor. I mean, indium phosphide substrate is really hot. Last I heard, there are a number of new entries in China market wants to get into indium phosphide substrates. But do I worry about them? But I really don't think I do. I'll tell you the reason, indium phosphide is not an easy material to work with. We worked with it for 40 years. And we know how long it took us to grow from 2-inch to 3-inch and that 3-inch gradually to 4, and we move into 6. And the EPD level, I mean, although it's highly technical, but when we first enter into a major laser maker in the U.S. market, their requirement of EPD is less than 500.

Now we're delivering less than 1/10 of it, okay? So I think those just take time and really experience to advance. And we're not standing still, and we're advancing. So I think to give you more assurances, I think HBT or the storage device market, I believe, doesn't have as high entry barrier as indium phosphide is, okay? So I think I'm reasonably confident about this and at least for the next 2 years. 3 years out, it's hard to say. But yesterday, we were talking to a major customer of ours. They were telling us, instead of the market is to expand by 20x, they're telling me actually it's 1,000x. I don't know how it comes to that, but it started to scale across, scale out and scale in and scale up. So every level is almost a 10x increase. And optical connectivity is at the heart of it.

So my answer is I don't think we're going to reach that point. Ask me next year, perhaps that we worry about it. And hopefully, we still don't have to worry about it.

Yes. Let me summarize. We have a long look forward, and we pay attention to it. It's visible all the way up to our Board level. So as CFO, I'm not at all worried about 2027 CapEx. I know it's less than is going to be needed. And I feel the same about 2028. So those 2 years, what we're planning to spend, I think, is very reasonable, and I don't think it's going to be overspending. When we get closer to 2029, we need to look at that. And we're growing us on this stuff. We're going to measure it and pay attention to it.

Maybe I'll ask a second question. If I heard you correctly, I think you announced a second supply agreement with Lumentum with -- I forgot the exact amount, but going into Q2, you had another agreement. Is this a follow-on agreement or expansion of the previous agreement or something else? And related to that, if I think I heard you talking about backlog is now over $500 million. It was over $100 million, I think, a quarter ago. So probably 4x, maybe 5x expansion of the backlog over the course of last -- maybe 90 days, mind if you give a little bit of color. Those are highly related, that's a 2-part question.

I got you, Charles. So no, the Lumentum contract is the contract that we signed in Q3. So it's not a double up. It's not a secondary. It is the one that was signed and announced earlier in Q3. So we're just reiterating that for the course of this conference call. As backlog goes, yes, we're -- obviously, we mentioned before that we're more than $100 million. We're a little bit vague on exactly how much more than $100 million that we were. But now we're happy to say that as we see growth, we've surpassed the $500 million barrier. And that's made up of a number of things in terms of long-term supply agreements, again, short-term, 12-month or less supply agreements and spot POs that go through 2027.

So really, that just gives us more encouragement and gives us more confidence that we're seeing growth into the rest of 2026 and through into 2027 with some significant backlog there. I'll make another noteworthy change here, and that's the demand from China is increasing in a significant way, right? Historically, we've built and shipped for China because we don't need permits. Again, everybody is now on allocation. We're accepting backlog as we see this, but we're also seeing a longer lead time out 9-plus months on a lot of this stuff. So of course, as we see longer lead times, we see more of these supply agreements, we see more demand coming this way. The backlog is just going to grow.

Your next question comes from the line of Tim Savageaux with Northland Capital Markets.

Congrats on the results and outlook and especially on the backlog increase. First question, sort of taking the discussion back to gross margins and kind of where you can go there. And yes, doing that math, I think you're solidly in the 60s in terms of where you're guiding. Your incremental gross margins in Q3 were 77%, which is pretty significant. And Gary, I know you're hesitant to talk about where these margins can go over time. But to the extent we were talking about lower levels just a few quarters ago, is it fair to look at that 60% level as kind of a new baseline with upside potential given what you're seeing on incremental gross margins? Or how are you looking at that now?

Well, it's hard to comment. It gets into a vocabulary that's so strange for me. But yes, it's -- we don't want the horse to run away with and get out of the racetrack and just be way ahead of us, but on our comments to you. So yes, it's pretty obvious that we're going to cross over 60% -- and -- but I have to say, and I don't mean it in a dodging way, but it's a fast-moving change. And we're hesitant to predict because things are moving so fast.

Let me add perhaps to this point is the moving market. I'll tell you, this year, the fastest growth segment in 2026 was 3-inch. And next year, the high growth we expect is going to be 4-inch. But that is more of a new territory, okay? And high-power laser require low EPD. And again, that's a new territory. And 6-inch is going to be -- although it's still going to be single digit for 2027, but it's going to grow, and that's going to command a good gross margin.

And looking at the revenues and results and the guidance, I know it seems like you've incorporated a significant portion of the long-term agreements in your backlog. I guess, if you look at Q3 and the guide for Q4, how significant a contributor are the initial ramps of those long-term agreements to what you saw in Q3 and are guiding for in Q4?

Yes. We're definitely starting to see some contributions coming from the long-term supply agreements in Q3 -- Q4, sorry. That will continue to build as we go into 2027. But I want to make a point in that when we talk about the long-term supply agreements, we don't have a whole lot of them at the moment. They're not a big part of our backlog. So although some of them extend out for several years, the LTSAs are still a relatively small percentage of the multiyear LTSAs, still a relatively small part of our capacity as it goes forward. So a lot of this is still being built up on spot purchase orders, annual contracts, that type of stuff. But as I said before, our lead time is increasing. So it just adds -- keeps on adding to that backlog as we accept orders.

And Tim, I would say that our Tim and Morris and our VP of Asia, Savan, they kind of pulled back on formal long-term agreements. And we don't want to lock up in that way. So we're maintaining flexibility. We are making commitments beyond 90 days or beyond 6 months, but we want to protect on price, and we also want to protect our ability to -- if we can do more or do less, we don't want to be locked in. So you're not going to -- the point is we're not going to be announcing multiple long-term agreements. There may be some more and plenty of customers want us to sign up for them, but it's not what we think is the right strategy for AXT.

That was going to be my next question. So that's good. So you're saying backlog is up $300 million or $400 million sequentially that is not majority or even materially driven by LTSAs. That's just kind of run rate business?

Yes, that's correct. That's run rate business.

Your next question comes from the line of Matt Bryson with Wedbush Securities.

I have one longer one and one quick one. Just for the longer one, it seems like low APV and your ability to deliver larger substrates is a substantial advantage. Is there any more color you can give us around what portions of shipments might be 4-inch and above or if there's a rule of thumb that we can think about in terms of either pricing or gross margin benefit that you get from shifting from 3-inch to 4-inch to 6-inch? And then I guess, also part of that, what portion of your competitors are able to deliver 4-inch or 6-inch substrates at this point?

Yes. Thanks, Matt. So the majority -- if you're looking at pure wafer volumes, the majority of the business has transitioned to 3-inch. Now a lot of the non-China business has been on 3-inch for a long time. And we're seeing a lot of the Chinese business move up into the 3-inch wafer size. We saw a couple of years ago that we started to see a transition. We made an announcement that we were seeing a 4-inch substrate going into AI-type data centers. And this was predominantly for detector material, photodetector material. Obviously, we continue to see that. That's been the market driver for 4-inch so far. And a lot of the photodetector material, especially the high-speed photodetector material is now firmly based on 4-inch.

What we're going to see next year, and we're starting to see that transition in Q3 and Q4 this year is a lot of the laser material is now going to also transition to 4-inch. So in 2023 -- sorry, 2023, in 2026, a lot of the business is running on 3-inch for lasers, 4-inch for detectors. In 2027, we're going to see a big shift as we go through the year. And I think towards the end of the year, we could be looking -- if you're looking at wafer volumes, just single wafer volumes, you could be looking at something equal in 3-inch and 4-inch by the end of the year. So this does give us a significant ASP boost. It also gives us a significant gross margin opportunity here as well.

What can our competitors deliver? It's variable, right? A lot of them still are stuck predominantly on 3-inch. The move to 4 is especially on the laser material and especially keeping the high-quality, low defect material is incredibly challenging. Morris said we've spent decades on building this up and the move to 4 in itself is a huge challenge, let alone the move to 6. I mentioned earlier that we've got this new furnace, this new crystal growth furnace. This gives us massive productivity improvements, not just on 6-inch. It's not just there for 6, gives us massive productivity improvements for 4-inch laser type material as well.

So as we build out new furnaces, we're going to be really heavily focused on putting the new design furnace in there with a real commitment on scaling from 3-inch to 4-inch and then to 6-inch beyond 2027. So I think as you look into '27, we're going to see a meaningful number coming from 4-inch and you're going to start to see 6-inch come on board. And I think we're leading the game there.

Yes. I think one of the Matt's question you have -- we have not answered is how many competitors can provide 4-inch and 6-inch. I think 4-inch is a bit harder to answer. But I think 6-inch so far, actually, I think we're climbing very fast, right? I think other than Us, there's a company called Us, and they are probably now equal to us. And the third is a very distant third.

Yes. Yes, there's 2 main players at 6-inch.

But the point is we're adding a huge number of capacity all based about 6-inch. And we're glad that it is going into pilot production now.

And then I just have one other quick one. Going back to Richard's kind of question around capacity. I know initially, I think you guys have talked about being able to double indium phosphide capacity in 2027. Is that still roughly how we should be thinking about things that from Q4 '26 to Q4 '27, numbers roughly doubling.

The challenge is this. I think we're going to be more than double in 2026. So if you take end of 2025 as one, we're probably going to be at 2.75 or 3 at the end of 2026, right? And I think right now, our goal is to double again in 2027. Hopefully, by midyear, we can tell you we're still ahead of the planning.

There are no further questions at this time. I will now turn the call back to Leslie Green for closing remarks.

Thanks, Tracy, and thank you all for participating in our conference call. We will be participating in the UBS Global Technology and AI Conference and the Northland Growth Conference in December as well as the Needham Growth Conference in January. We hope to see many of you there. And as always, please feel free to contact us if you'd like to set up a call. We look forward to speaking with you in the near future.

And this concludes today's call. Thank you for attending. You may now disconnect.

Good afternoon, everyone, and welcome to AXT's Second Quarter 2026 Financial Conference Call. Leading the call today is Dr. Morris Young, Chief Executive Officer; and Gary Fischer, Chief Financial Officer. In addition, Tim Bettles, VP of Business Development, will be participating in the Q&A portion of the call. My name is Kenneth, and I will be your coordinator today.

I would now like to turn the call over to Leslie Green, Investor Relations for AXT.

Thank you, Kenneth, and good afternoon, everyone. Before we begin, I would like to remind you that during the course of this conference call, including comments made in response to your questions, we will provide projections or make other forward-looking statements regarding, among other things, the future financial performance of the company, market conditions and trends, emerging applications using chips or devices fabricated on our substrates, our product mix, global economic and political conditions, including trade tariffs and import and export restrictions, ability to obtain China export permits, timing of receipt of export permits, list our subsidiary, Tongmei in Hong Kong, our ability to increase orders in succeeding quarters to control costs and expenses, to improve manufacturing yields and efficiencies or to utilize our manufacturing capacity.

We wish to caution you that such statements deal with future events, are based on management's current expectations and are subject to risks and uncertainties that could cause actual events and results to differ materially. In addition to the matters just listed, these uncertainties and risks include, but are not limited to, the financial performance of our partially owned supply chain companies and increased environmental regulations in China. In addition to the factors just mentioned that may be discussed on this call, we refer you to the company's periodic reports filed with the Securities and Exchange Commission. These are available online by link from our website and contain additional information on risk factors that could cause actual results to differ materially from our current expectations. This conference call will be available on our website at axt.com through July 30, 2027.

Also, I want to note that shortly following the close of the market today, we issued a press release reporting financial results for the second quarter of 2026. This information is available on the Investor Relations portion of our website.

I would now like to turn the call over to Gary Fischer for a review of our second quarter 2026 results. Gary?

Thank you, Leslie, and good afternoon to everyone. Our Q2 financial results highlight an exciting inflection in our business trajectory and the beginnings of a multi-year growth phase for AXT. Revenue for the second quarter of 2026 is $47.6 million. This is the highest quarterly revenue in AXT's history, up nearly 77% from $26.9 million in the first quarter and up 164% from $18.0 million in the second quarter of 2025.

To break down our Q2 2026 revenue for you by product category, indium phosphide was $30.7 million, also the highest in our company's history. Let me repeat that. Indium phosphide was $30.7 million, also the highest in our company's history, primarily from data center applications. Gallium arsenide was $6.6 million, germanium substrates were $272,000. Finally, revenue from our consolidated raw material joint venture companies in Q2 was $10.0 million. The top 5 customers generated approximately 30% of total revenue and no customers are over the 10% level.

Gross margin showed a substantial improvement again in the second quarter, primarily driven by an increase in total volume and a favorable product mix. Non-GAAP gross margin was 45.0% compared with 29.9% gross margin in Q1 of 2026 and 8.2% gross margin in Q2 of 2025. For those who prefer to track results on a GAAP basis, gross margin in the second quarter was 44.9% compared with 29.6% in Q1 and 8.0% in Q2 of 2025. This is a huge, huge positive change from Q1 of 2025.

Moving to operating expenses. Our total non-GAAP operating expense in Q2 was $10.2 million compared with $8.6 million in Q1 and $7.6 million in Q2 of 2025. On a GAAP basis, total operating expense in Q2 was $10.9 million compared with $9.6 million in Q1 and $8.2 million in Q2 of last year. Our non-GAAP operating profit for the second quarter of 2026 is $11.2 million compared with a non-GAAP operating loss in Q1 of 2026 of $550,000 and a non-GAAP operating loss of $6.1 million in Q2 of 2025. For reference, our GAAP operating line for the second quarter of 2026 was a profit of $10.4 million compared with an operating loss of $1.6 million in Q1 and an operating loss of $6.7 million in Q2 of 2025. Nonoperating other income and expense and other items below the operating line for the second quarter of 2026 was a net profit of $705,000. The details can be seen in the P&L included in our press release today.

In Q2 2026, we returned the company to profitability. We are pleased to report a non-GAAP net profit of $11.9 million or $0.19 per diluted share. This compares with a non-GAAP net loss of $585,000 or $0.01 per share loss in the first quarter and a non-GAAP net loss in Q2 of 2025 of $6.4 million or $0.15 per share loss. On a GAAP basis, net profit in Q2 is $11.1 million or $0.17 per diluted share. By comparison, net loss was $1.6 million or $0.03 per share in the first quarter and a GAAP net loss in Q2 of last year of $7.0 million. The weighted average diluted shares outstanding in Q2 is 63.5 million. Cash, cash equivalents and investments increased by $625.6 million to $748.8 million as of June 30. This was primarily the result of our secondary public offering of common stock, which closed on April 22 and generated approximately $632 million before expenses. By comparison, at March 31, our cash was $120 million.

Accounts receivable increased by $4.7 million. During Q2, we signed long-term supply agreements with Casela and Coherent. Under the terms of these agreements, we received prepayments for wafers of $22.3 million and $25.4 million, respectively. These type of agreements with significant upfront cash are an additional signpost regarding the important use of indium phosphide for high-speed optical data transmission required in AI data centers. Morris is going to talk more about this in a moment. These prepayments are posted on our financial statements as a liability, and they will be converted to revenue when the liability reduces as we ship product against these agreements.

Depreciation and amortization in the second quarter was $2.5 million. Total stock comp was $0.8 million. Net inventory was up approximately $6.2 million in the second quarter to $96.3 million, and this concludes our report on financial numbers.

Turning to our plan to list our subsidiary, Tongmei in China. On June 26, Tongmei notified the stock exchange that it was moving its application for an initial public offering on the STAR market. This was accepted in July. AXT and Tongmei will now instead transfer our efforts towards listing on the Hong Kong Exchange, which will likely take about a year to complete. We continue to believe that an IPO in China is highly beneficial in expanding our capacity in China and the most efficient and effective way to support the rapidly evolving AI infrastructure build-out. This concludes our China development of its semiconductor supply chain to meet increased China-based demand for indium phosphide substrates.

Tongmei's move to the Hong Kong Stock Exchange creates a redemption right for the $49 million invested by the PE funds back in 2021. However, we've been in discussion with them and currently, they all wish to continue their investment and not be redeemed. We have sufficient cash to redeem investments should they be requested.

With that, I'll turn the call over to Dr. Morris Young for a review of our business and markets. Morris?

Thank you, Gary. This is an incredibly exciting time for AXT. As Gary mentioned, we have reached an inflection point in our business where the customer demand is extremely strong for our indium phosphide material. We have committed to doubling our indium phosphide capacity in 2026, and I'm pleased to report that we are ahead of the schedule in that effort. But more importantly, I can now report to you that our revenue opportunity for indium phosphide is on track to more than triple by the end of 2026, with continued significant expansion expected in 2027.

This is happening as a result of 3 factors. First, we have been able to expand capacity at a faster rate than we expected. Second, we're making significant strides in driving our manufacturing productivity with new crystal-growing furnace designs and increase our output. And third, our customers are moving to larger diameter substrates and higher-value products, resulting in favorable pricing trends. The combination of these factors is driving a step function increase in our revenue in Q2. We recorded our highest quarterly revenue and highest indium phosphide revenue in our history with backlog that continues to grow and now is well over $100 million.

Customer demand continues to outpace supply no matter how fast we add capacity. Broadly, the deployment of optical connectivity in AI data center is accelerating as hyperscalers scale GPU dense architectures and look for higher speed, lower power photonics to move data more efficiently. In the near-term, we're seeing high demand from the industry migration to 800G and 1.6T transceivers modules, for which indium phosphide-based lasers and detectors are essential for higher performance optical links. Longer-term, hyperscalers are advancing towards near packaged and co-packaged optics, which will continue to drive increasing demand for our material.

Overall, these trends point to a durable long-term build-out of sensor optical infrastructure and a multiyear demand cycle for our indium phosphide. As many of you are aware, the competitive landscape for high-quality indium phosphide is limited to just a few players due to primarily a very high technical barrier to entry. Among our peers, we believe AXT is the strongest position to increase manufacturing capacity quickly and at a scale and quality needed to move the needle in our industry and meet our customers' requirements.

Our team in China has done an outstanding job in bringing up new lines in our existing factory facilities as well as innovating to drive higher productivity. In working closely with our direct customers as well as our major end customers to understand their expected demand and road maps, we are well into the planning process to double our capacity again in 2027 in an adjacent location. This will make AXT by far the largest indium phosphide producer in the world. In addition to growing our manufacturing footprint, we have also made great strides in development of our 6-inch indium phosphide capability. 6-inch indium phosphide substrates are exponentially more difficult to produce in volume than 3- or 4-inch wafers. And I'm very pleased and proud of our team's progress towards this new offering.

I also want to thank our customers who have partnered with us throughout this process. We are excited to support them as we move forward with the -- with our own capability. Partnership is a cornerstone of our business philosophy through which we have been able to deliver game-changing innovation. This dates back to the formation of joint ventures that today make up a unique and vertically integrated supply chain. And in the last 10 years, our work with 2 globally recognized indium phosphide customers helped us to raise the bar even further on our manufacturing and business processes to be able to support the rigorous tender of some of the most prestigious companies in the world.

Strong partnership lifts innovation and enables both partners to achieve more. That is why one of the most rewarding aspect of our unfolding chapter in our history is the extent to which we have been able to partner with leading customers around the world who are defining the next generation of data center connectivity. We recently signed strategic long-term supply agreement with Casela and Coherent. And this week, we're very pleased to announce an agreement with Lumentum. These agreements deepens our relationship with these important customers working shoulder to shoulder with them to help them deliver on their own vision and road maps. In addition, they gave us an even greater sense of conviction that our capacity build-out is merited and necessary.

From a geographic perspective, the massive AI infrastructure build-out and the planned capacity CapEx surround spending by cloud services and AI platform providers in the U.S. is the primary driver for EML and silicon photonics-based optical transceivers as well as high-speed photo detectors. We believe that today, our materials are being used in multiple U.S. hyperscalers. We expect that end customer use will continue to broaden. We're also seeing huge growth in China as China moves to accelerate its capability throughout the AI supply chain. Our revenue related to indium phosphide-based lasers market in China more than doubled in Q2 from the current quarter, and we expect continued strong growth in Q3. This highlights China's increasing investment in AI infrastructure supply chain for the global market. This is a great opportunity for AXT as there's no permit required to ship our product within China.

Turning to gallium arsenide. In Q2, demand for semiconducting wafers for industrial robotics and data center laser applications grew sequentially from the prior quarter. We also continue to see demand for semi-insulating wafers for wireless RF devices and believe that we have a strong opportunity for market share expansion. Finally, our raw material business continued to be highly strategic to our growth plan and also generated record third quarter revenue in Q2. As we reported last quarter, our subsidiary, Jin Mei, is now refining high-purity indium, which gives us direct control of a guaranteed supply of yet another critical material for our indium phosphide substrates. We're also investing to help Jin Mei to expand their capability so that when AXT's demand for polymaterial grows, Jin Mei will continue to provide a meaningful portion of our raw material requirements.

Globally, there continues to be a great awareness of the importance of our raw material supply chain, and we are decades ahead of the curve in developing our unique integrated supply chain. We will continue to invest in our portfolio as we believe it is a major competitive differentiator.

Now in summary, we believe AXT is entering one of the most consequential chapter in our company history. The investment we are making today in capacity, in technology and in our unique integrated supply chain position us to meet the extraordinary demand we see building across the optical and AI infrastructure markets. Our customer engagement is deepening, our visibility is improving and our competitive differentiation is strong. While we remain disciplined and thoughtful in our execution, we're confident that the groundwork we are laying now will enable transformational growth in the years to come.

With that, I turn the call back to Gary for our third quarter guidance. Gary?

Thank you, Morris. As of today, we have approximately $66 million in revenue that can be realized in Q3 across our substrate product lines and raw materials for which we either already have a permit to ship or for which an export permit is not required. So $66 million. We have a high degree of confidence in recognizing this revenue. We could see upside, even significant upside to this number in Q3 should we receive permits for additional orders for which we have the inventory to support. But we do not want to stress -- but we do want to stress that we cannot predict the future timing of permits or success in obtaining them for any specific customer or individual order.

We have delivered strong gross margin improvement over the past several quarters. Further improvement depends on a number of factors, including total revenue as it relates to the revenue mix by product, absorption of fixed costs and our ability to continue to drive better manufacturing efficiency. With regards to OpEx, we expect that it will be approximately $10.5 million in Q3 on a non-GAAP basis and approximately $11 million on a GAAP basis. With these factors in mind, we believe our non-GAAP net income will be in the range of $0.30 to $0.32 and GAAP net income in the range of $0.29 to $0.31. We estimate share count for Q3 will be approximately 66.5 million shares.

Okay. This concludes our prepared comments. We're glad to answer your questions now. Kenneth?

[Operator Instructions] Your first question comes from the line of Tim Savageaux from Northland Capital Markets.

Congrats on the results and the guide. My first question is about the comment on the call about, I guess, an increased target for indium phosphide capacity for this year. And it looks like -- I assume most of the growth you're guiding to in Q3 comes from indium phosphide. I think we were looking at doubling from a $20 million type level as the original target, maybe $35 million to $40 million. Am I right to thinking the new sort of target exiting the year is something in the neighborhood of $60 million in quarterly indium phosphide capacity? And I'll follow up from there.

Yes, that's about right, Tim. That's exactly what we're looking at here. About $60 million there thereabouts.

And then you're looking to double that still, I guess, exiting calendar '27. So just confirmation on that. And then around the Lumentum deal, I wonder if you could -- obviously, you've got larger prepays, a longer-term. I wonder if you could speak to maybe the overall size of that opportunity from a baseline standpoint or upside or however you want to talk about it. Congrats again.

Thank you, Tim. So yes, next year, we're looking at doubling, slightly more than doubling again, take our revenue to somewhere in the region of about $130 million a quarter exiting the year. Yes, thank you about the Lumentum deal. Clearly, we've got some prepayments on that, but we're not discussing the total revenue impact of that deal at this moment.

So maybe let me add one point about the capacity expansion. We are planning at least to double next year. But as you know, this target changes when -- in fact, I think this year, we're going to more than double and it's because customer demand is just mounting. So we are finding whatever ways to increase that capacity expansion, although -- so I'm saying, although we are planning for double next year, but depends on how the business develops in the second quarter, we could find another way to even better than that, okay? That's my -- so in a way, it's a moving target, but we think it's going to be more than double in 2027. The demand is moving faster than we can move. We're doing great to move fast, but the demand is even stronger.

Not much faster, but you guys are moving pretty fast.

Your next question comes from the line of Matt Bryson with Wedbush Securities.

Congrats on the results and guide. Just when -- obviously, you're having a whole lot more success in getting permits. And it seems like with the Coherent deal, have certainty that you're going to get permits to ship out China given the terms of that deal. I guess can you talk about how the process has changed and about how you have more confidence in getting these permits or what has changed?

Yes, sure. Thanks, Matt. Permits always remain a bit of an issue on the back of our minds. As Gary mentioned, it's not something that we can absolutely predict both the timing and the certainty of. But we are seeing more regularity in the process, especially in certain geographic regions. So that's great news. And we're seeing increased demand in those geographic regions, too. So we're focusing now on -- even with greater intensity on capacity and allocation. But yes, right now, the permits, as I said, we're seeing more regularity in certain geographic regions. And we're driving more and more permit applications through the Ministry of Commerce.

Second question, Gary, my math has gross margins staying relatively stable in Q3. Is that roughly the right way to think about things? And I guess as part of that, is there any more -- given how tight indium phosphide seems, is there any more room for price appreciation in our models?

Well, it is a moving target. And of course, I know you guys are going to quote to me that I would always say, okay, you can go to 35%, but that's not management's target. Management's target is a number that begins with 4%. I'm delighted that we've got here as fast as we did. I think I would recommend to stick close to what we're at right now. But I have to say, again, management's target is better than that. And let's see what we can do. There's -- when you add more volume, that helps on your gross margin because the fixed costs get absorbed over more units. And also, when you add more volume in manufacturing business, you get better at it. So we're just experiencing a lot of positive influences right now to push this over 40% and stay at 45% for now, but put your seatbelts on.

Well, I can't help myself but make a comment. I'm a CEO, but I know my member, okay? Look, everybody knows our indium phosphide business has better margin than the other 2 businesses, the gallium arsenide and JVs, okay? As we grow for next quarter, it's obviously all the growth happening in indium phosphide. So just by simple math, the gross margin is going to be better. Right. Because the sales of indium phosphide is increasing and the other stuff is not increasing as fast. So we're optimistic.

That's really -- yes. But we try and be conservative on this kind of a discussion.

Yes, I want to add another point as well. The market is moving to larger diameters here, too. So we're seeing a migration from 2-inch to 3-inch, 3-inch to 4-inch. And of course, now there's a big push towards 6-inch for the future. This gives us a great opportunity to increase our gross margins.

Yes. Let's not spend out the book, but let me give you another one. Because the demand is so strong, the whole indium phosphide line is fully utilized. Let me give you an example. In the past, some of the, let's say, smaller diameter 2-inch, they are not in favor, so they are not sold out, and the big demand is on 3-inch. Now because the demand is so strong, the customer are forced or they want everything. So whatever we can produce, we can sell. That also will help us in terms of margins.

Your next question comes from the line of Richard Shannon with Craig-Hallum.

I'll add congratulations on an excellent quarter. Keep up the great work here. I guess my first question is the language you used for the backlog, maybe it was slightly different, but you used the same number of $100 million. I think you're just saying a lot more than $100 million. I wonder if you could clarify that number any more. And then specifically comment how much of your calendar '27 is covered by backlog.

I'm going to let Tim answer that. So go ahead, Tim.

Yes, I don't want to go into a lot of details about how big exactly our backlog is. But I can tell you that it is growing, and I can tell you it continues to grow even as we ship more material. So demand just completely outpaces our ability to increase capacity, even though we've increased capacity or we're about to increase capacity 3x this year, just simply can't keep up with it. So backlog continues to grow, as I say, beyond $100 million right now. In terms of 2027, we're covered with backlog going out into 2027. Obviously, a lot of our customers, if we could deliver the majority of that today, they would take it today. But that does cover going out to 2027. And of course, we have these long-term supply agreements that take us out into 2027 and beyond as well. So we've got a lot of next year and beyond covered with LTSAs and even in some cases, backlog.

Look, I think the other answer why we're not giving out the backlog perhaps is that we are not taking orders if customer wants to place order. We are looking at whether we can deliver because once we take the order, we're going to put them on the production queue. Right now, it's full. So it's difficult to know how much the backlog is. In fact, I think we open up the floodgate it's going to be huge. So we're not counting on it. And as far as 2027 is concerned, I think if we want to sign up a lot of -- well, Tim is working on other long-term supply agreement. But that doesn't mean that 2027 is all spoken off.

That is we are measuring how much we're expanding, how much we want to sign up for long-term supply agreement and some of them we want to reserve for customers coming in. So I think right now, order is not a problem. mostly is how fast we can grow.

Appreciate that. A couple more questions for me. I'll jump on the line here. The next one is on indium phosphide here. And specifically, how much of that was shipped into China versus rest of the world? And how do you see that going over the next, say, couple of years or so? And I ask this because you've obviously signed up an agreement with a Chinese laser company, but then also 2 North American-based laser companies here. And while I'm sure those aren't the only customers you're going to have for indium phosphide here, I'd love to get a sense of how this ratio changes over time. Kind of what's the peak from China? And what do you see as kind of that long-term stable share between China and the rest of the world?

That's a great question, Richard. So there's certainly a lot of market opportunity in China right now. As we've said, we're doubling our capacity, actually tripling our capacity in 2026. And China is definitely taking some of that capacity as we move forward. What we're seeing with the permits and with the demand globally, this is a global market, remember. We are seeing growth across all sectors. So China right now is definitely above 50% of our revenue in Q2. I would anticipate that we would see a revenue split moving forward somewhere in that 40% to 60% range as we build up both capacity and we build up long-term supply agreements, both within China and throughout the rest of the world. So yes, I would kind of model that as a China being 40% to 60% of our revenue.

And last question for me is on the topic of gross margins. I know there was a previous question on this topic. I'm going to ask a question slightly different, Gary, which is -- and I think even Morris commented today, and we've heard this many times in the past where phosphide is a positive mix dynamic and only seemingly getting better given the pricing comments you've mentioned here. But also, we're going to see from your capacity expansion, some depreciation costs here. And so I would love to get a sense of from the number you just reported in the second quarter, which is utterly fantastic, how much more can it go? Can you get to a number that starts with the 5?

Well, let's see. Can we get there? It would be a record for us, that's for sure. But yes, further increases in volume and improvements in productivity as well as continued favorable mix moving towards larger diameter substrates. We should definitely be targeting a number that begins with the 5. But I don't want you to, Richard, okay?

That's fine. I won't. I just want to know what. I won't I never have. I just want to understand how close to the asymptote we are.

You've been with us for a long time to cover us. And obviously, this is, as Morris said, sort of more than an inflection point. This is a huge step up. So we're -- we'll try and be as specific and accurate as we can, but it's moving pretty fast. So we want to be careful what we tell you. But yes, we're going to target something that begins with the file.

Your next question comes from the line of Charles Shi with Needham.

I guess you guys are in China right now. So the question -- first question I have regarding the capacity exiting the year, raising from basically $35 million per quarter, $35 million per quarter to $60 million and next year, basically raising from $70 million per quarter to $130 million per quarter. Are those numbers correct? And I think previously, on the previous capacity numbers, you plan to spend -- well, I'm looking at my numbers, $40 million CapEx this year, $100 million CapEx next year. Do you -- what's the new CapEx number? Because it does look like the capacity growth has upsized a lot. I want to get some thoughts on CapEx.

Yes. Thanks, Charles. So the capacity is growing faster than we thought. Certainly, in terms of revenue, that comes out from a number of factors, as Morris said. We've been able to accelerate the actual physical capacity that we have here. We are moving to larger diameter substrates, which, of course, helps the revenue. And we're seeing greater productivity. As Gary mentioned, moving to larger and larger volumes increases the productivity of the facility. We've seen this time and time again. So part of the capacity increase that we're seeing here isn't just a CapEx spend, but it's a productivity and a product mix change here. And that's what's really allowing us to grow the revenue quicker than we anticipated. So there's a lot going on here.

Now when you're looking at CapEx spend to get this additional capacity, there is actually not a lot of additional CapEx spend here. As I said, as we're gaining capacity through other factors rather than just hardware deployment, it means that we can gain capacity without huge additional CapEx spend on that.

So basically, it sounds like you are reaffirming the CapEx plan you previously communicated. Is that right?

That's correct. That's correct.

The second question, once again on backlog. Morris, if I understand what you said, you only want to book the order. That's what I heard. You only want to book the order -- only a booked order can be put in backlog when you can commit to ship to the customers given that you are probably still trying to catch up with the demand by increasing supply. $100 million plus backlog, but I think I'm looking at you're already shipping $30-plus million this quarter looks like implied for September quarter, you probably will be able to ship $50 million.

I wonder if you can give us a little bit more how much more than $100 million you actually can see because it sounds a little bit too low to me that your backlog only covers a little bit over 2 quarters of the -- next 2 quarters of the expected indium phosphide revenue at the implied Q3 run rate. So I want to get some thoughts what exactly is your visibility now? And why couldn't you -- why don't you book more orders? And we would like to see maybe the backlog can be a little bit higher than what you just communicated.

Yes. The backlog, as I say, we're not giving actual backlog numbers out here. I can say that it's well over $100 million. It exceeds 2 quarters for sure. I just don't want to give out too much information about that at this time. And the backlog is also covered with a lot of long-term supply agreements that are in place. So there's a lot of commitment going out well beyond 2 quarters, both in terms of backlog and long-term supply agreements. So I really don't worry that this is a short-term thing. And remember, a lot of this backlog here is, of course, is a factor of the permits as we wait for permits, and it doesn't include a lot of the China business. So we can turn the China business a lot quicker than we can turn the permitting business.

As Gary said, permits are certainly getting free. They're getting quicker, but it still takes time to apply for a permit, and we cannot apply for a permit without an order in place.

So let me comment on the backlog issue. The backlog, when we -- our visibility was not good, then usually it's only 1 quarter or maybe 2 quarters issue. But right now, visibility is so good that it extends out 3 or 4 quarters. So it's not a fair comparison in a way. And the other thing is that we are actually -- honestly, we're not taking orders. When customers give us the demand, we look at what we can plan the production capacity will be and talk to customers about, okay, you can place this order because we have now planned capacity we can accommodate this order. But beyond that, we are not taking the order.

So the backlog can be much bigger if we take all the orders, but then we are not expanding the capacity. So why are we taking an order? Do you understand what I'm saying? So it doesn't make any sense to give you, oh, we could have $150 million back order. It's not the same measure anymore.

So Morris, just to clarify, backlog is not a issue. I think you've proven that's not an issue. Just want to clarify on that. But okay, just maybe a third question I have, maybe a technology question, maybe for Morris. Morris, you guys also have a pretty strong gallium arsenide product line. And I'm sure you've heard about potential use of VCSEL for scale up rather than use indium phosphide for scale up. It's a shorter distance and VCSEL probably has some advantages there. And I wonder if you have any customer discussion around the VCSEL around maybe supplying them the gallium arsenide substrates there and how the -- any of the conversation going so far?

Yes. We have customers in China who are developing VCSEL solutions. And in fact, there's a U.S. customer also talking to us about using gallium arsenide for VCSEL solutions, correct?

Yes, correct. We're currently a supplier to gallium arsenide VCSELs for 2 large data center companies or laser companies. So yes, we do have some visibility out there. And we are seeing that these technologies coexist, right? So the people that are deploying gallium arsenide VCSELs are also very, very strongly focused on indium phosphide as well. I'm seeing more focus on the indium phosphide side of the business than the VCSELs. But as I say, there's -- the VCSEL technology has been out there for a long time. And I don't see it going away. I see an indium phosphide lasers, silicon photonics and gallium arsenide-based VCSELs coexisting in this marketplace.

So from what I understand looks like the speed is the killer or is in favor of indium phosphide. VCSEL, I think it's more difficult to reach 200G, both in terms of laser emitter as well as detectors. So when you go to 200G, it has to be indium phosphide detectors and also indium phosphide laser work better. Well, I am in favor of indium phosphide for sure. The reason is that indium phosphide, we have more margins out of the supply chain, and we are a dominant player in indium phosphide. So that's the answer.

We have another question from Tim Savageaux from Northland Capital Markets.

I wanted to kind of stick with that one question, one follow-up thing before I suppose that's somewhat of an outlier. But the question is, and maybe this sort of sync up with your China commentary. To what extent were the new deals, long-term supply agreements you've announced in recent weeks, contributors either to the Q2 results or Q3 guide -- or do we have a fair bit of that in front of us?

That's a great question, Tim. The latter is the answer. We have a fair bit of that in front of us. We're supplying materials to back up those long-term supply agreements to get qualified and get ready for them. So they don't move the needle too much on Q2. We're going to see a bigger impact in Q3, and then we're going to see further growth moving out through Q4 and into next year and beyond.

And the Casela deal, doesn't start until 2027.

That's a good point. That's not happening right now in terms of that contract, even though we are selling stuff to them.

I probably shouldn't known that.

There are no further questions at this time. I will now turn the call back to Leslie Green for closing remarks.

Thank you for participating in our conference call. We will be participating in the Needham Virtual Investor Conference in August and the B. Riley Securities Consumer and TMT Conference in September, and we hope to see many of you there. As always, feel free to contact us if you'd like to set up a call, and we look forward to speaking with you in the near future.

This concludes today's call. Thank you for attending. You may now disconnect.

Good afternoon, everyone, and welcome to AXT's First Quarter 2026 Earnings Conference Call. Leading the call today is Dr. Morris Young, Chief Executive Officer; and Gary Fischer, Chief Financial Officer. In addition, Tim Bettles, VP of Business Development, will be participating in the Q&A portion of the call. My name is Tracy, and I will be your coordinator today.

[Operator Instructions] I would now like to turn the call over to Leslie Green, Investor Relations for AXT. Leslie, go ahead.

Thank you, Tracy, and good afternoon, everyone. Before we begin, I would like to remind you that during the course of this conference call, including comments made in response to your questions, we will provide projections or make other forward-looking statements regarding, among other things, the future financial performance of the company, market conditions and trends, emerging applications using chips or devices fabricated on our substrates, our product mix, global economic and political conditions, including trade tariffs and import and export restrictions, ability to obtain China export permits, timing of receipt of export permits, our plan to list our subsidiary, Tongmei in China, our ability to increase orders in succeeding quarters to control costs and expenses, to improve manufacturing yields and efficiencies or to utilize our manufacturing capacity.

We wish to caution you that such statements deal with future events are based on management's current expectations and are subject to risks and uncertainties that could cause actual events or results to differ materially.

In addition to the matters just listed, these uncertainties and risks include, but are not limited to, the financial performance of our partially owned supply chain companies and increased environmental regulations in China.

In addition to the factors just mentioned or that may be discussed in this call, we refer you to the company's periodic reports filed with the Securities and Exchange Commission. These are available online by link from our website and contain additional information on risk factors that could cause actual results to differ materially from our current expectations.

This conference call will be available on our website at axt.com through April 30, 2027. Also, I want to note that shortly following the close of market today, we issued a press release reporting financial results for the first quarter of 2026. This information is available on our website at axt.com.

I would now like to turn the call over to Gary Fischer for a review of our first quarter results. Gary?

Thank you, Leslie, and good afternoon to everyone. Revenue for the first quarter of 2026 was $26.9 million compared with $23.0 million in the fourth quarter of 2025 and $19.4 million in the first quarter of 2025 last year.

To break down our Q1 '26 revenue for you by product category, Indium Phosphide was $13.6 million, primarily from data center applications. Gallium Arsenide was $5.4 million, Germanium substrates were $200,000. Finally, revenue from our consolidated raw material joint venture companies in Q1 was $7.6 million.

In the first quarter of 2026, revenue from Asia Pacific was 78%, Europe was 21% and North America was 1%. The top 5 customers generated approximately 32% of total revenue and no customers were over the 10% level. Gross margin showed a substantial improvement in the first quarter.

Non-GAAP gross margin was 29.9% compared with 21.5% gross margin in Q4 of 2025 and a negative 6.1% gross margin in Q1 of 2025 last year. For those who prefer to track results on a GAAP basis, gross margin in the first quarter was 29.6% compared with 20.9% in Q4 and a negative 6.4% in Q1 of 2025.

Moving to operating expenses. Total non-GAAP operating expense in Q1 was $8.6 million compared with $7.5 million in Q4 and $8.5 million in Q1 of 2025. On a GAAP basis, total operating expenses in Q1 was $9.6 million compared with $8.7 million in Q4 of 2025 and $9.0 million in Q1 of 2025.

Our non-GAAP operating loss for the first quarter of 2026 was $550,000 compared to a non-GAAP operating loss in Q4 of 2025 of $2.6 million and a non-GAAP operating loss of $9.6 million in Q1 of 2025.

For reference, our GAAP operating line for the first quarter of 2026 was a net loss of $1.6 million compared with an operating loss of $3.8 million in Q4 of 2025 and an operating loss of $10.3 million in Q1 of 2025.

Nonoperating other income and expense and other items below the operating line for the first quarter of 2026 was a net loss of $35,000. The details can be seen in the P&L included in our press release today.

In Q1 of 2026, we made substantial progress towards profitability. We had a non-GAAP net loss of $585,000 or $0.01 per share compared with a non-GAAP net loss of $2.3 million or $0.05 per share in the fourth quarter and non-GAAP net loss in Q1 of 2025 of $8.2 million or $0.19 per share.

On a GAAP basis, the net loss in Q1 was $1.6 million or $0.03 per share compared to a net loss of $3.6 million or $0.08 a share in the fourth quarter and $8.8 million or $0.20 per share last year in Q1 of 2025. The weighted average basic shares outstanding in Q1 of 2026 was 53.3 million.

Cash, cash equivalents and investments decreased by $5.1 million to $123 million as of March 31. By comparison, at December 31, it was $128.4 million. Accounts receivable increased by $5.2 million, almost exactly the same as the change in cash.

Depreciation and amortization in the first quarter was $2.4 million. Total stock comp was $1.0 million. Net inventory was up approximately $8.5 million for the first quarter to $90.2 million. This concludes the discussion of our quarterly financial results.

Turning to our plan to list our subsidiary, Tongmei in China on the STAR market in Shanghai. We remain very interested in completing the IPO, particularly in light of the rapidly evolving AI infrastructure build-out in China and China's development of its semiconductor supply chain, which is fueling increased China-based demand for Indium Phosphide substrates.

We have continued to keep our IPO application current, and Tongmei remains in process as a part of a much more selective and smaller group of prospective listings than a few years ago. Though the current geopolitical environment is dynamic, Tongmei is considered a Chinese company and continues to be regarded in China as a good IPO candidate. We will keep you informed of any updates.

With that, I'll now turn the call over to Dr. Morris Young for a review of our business and markets. Morris?

Thank you, Gary. This is an incredibly exciting time for AXT. As many of you are aware, last week, we completed a capital raise for $632.5 million in support of Tongmei's Indium Phosphide capacity expansion as well as R&D investment in new products like 6-inch Indium Phosphide and other working capital needs. With our backlog of orders and customer forecast achieving record levels, we are laser-focused on adding capacity to support customer requirements.

I'm pleased to report that we are running ahead of our plan to double our Indium Phosphide capacity this year from Q4 of 2025 levels. Our capability to scale up quickly is unique among our peers. Unlike our competitors, AXT designs and builds our own crystal growth furnaces, has our own supply of critical raw materials and has the manufacturing space in place to achieve our expansion goal this year.

As you can imagine, longer-term capacity planning is one of the most important discussions we're having today with customers and major supply chain players in our space. The message we are having for them is this.

AXT is stepping up beyond our 2026 capacity expansion, we're planning to double our Indium Phosphide capacity again in 2027, with a new facility near our current one that we will be dedicated to Indium Phosphide wafer production.

Our 2028 planning is also underway, and we expect to expand again meaningfully. This is an industry in which scale matters. The barriers to entry are high even for most skilled manufacturers. As the market continues to grow, capacity has become a critical enabler.

What we are hearing from the industry sources and echo from our customers is the expectation that the market for optical components will increase significantly in the coming years, driving a 4x to 6x increase in substrate market overall in the next three to five years, driven by both scale-out and scale-up applications.

Beyond pluggable transceivers, we are seeing a very large developing market for CPO, co-packaged optics. We are actively engaging in discussions with customers about their technical and timing requirements and believe this could represent another inflection point in our business beginning in late 2027 and beyond.

With this massive growth cycle ahead of us, we are actively working with a multitude of players from our direct customers to the end customers with whom we have not historically had direct relationships. We are there to understand their longer-term requirements and to align our growth and innovation plans accordingly. This will be a thoughtful and measured process, but we believe we are in a best position competitively to support and enable our industry in meeting its current and future needs.

Over the last few quarters, the expansion of our Indium Phosphide customer base has been gratifying. We're now supporting nearly all leading customers in the optical space. This includes Tier 1 laser manufacturers and optical transceiver module makers, both around the globe and in China.

In alignment with our customers' technical requirements and roadmaps, we're making important progress on our 6-inch Indium Phosphide product for both iron doped and sulfur doped specifications. A significant part of our capacity expansion will be focused on 6-inch crystal growth technology to support the planned roadmap of 6-inch capability by our customers. We're excited to be able to demonstrate the technological advantage of our low EPD wafers as the market moves to optical devices with higher speeds and greater sophistication for both scale-up and scale-out applications.

Now turning to Q1. Export permits in our first quarter came in slightly better than our guidance and are off to a solid start in Q2. Gary will take you through our full guidance in a few minutes, but we're expecting to achieve sequential revenue growth in Q2, driven primarily by growth in Indium Phosphide. In fact, Q2 will be expected to be our largest quarter for Indium Phosphide in AXT's history. This derives from an Indium Phosphide backlog that has now reached a new high of over $100 million.

As we mentioned last quarter, customers are giving us more visibility into their expected demand and working closely with them in this supply-constrained environment to meet their need, as we continue to expand our capacity. From a geographic demand perspective, the massive AI infrastructure build-out and planned CapEx spending by cloud services and AI platform providers in the U.S. is the primary driver for EML and silicon photonics-based optical transceivers as well as high-speed photodetectors.

We believe that today, our material is being used in multiple U.S. hyperscalers. We expect that end customers' use will continue to broaden. We're also seeing significant growth in China, as China moves to accelerate its capability throughout the AI supply chain. Our revenue related to Indium Phosphide-based laser market in China more than doubled in Q1 from the prior quarter, and we expect them to double again in Q2. This highlights China's increasing investment in AI infrastructure supply chain for the global market. This is a great opportunity for AXT as there is no permit required to ship our product within China.

Turning to Gallium Arsenide. In Q1, demand for semiconducting wafers for industry robotics and data center lasers applications all held steady from the prior quarter. We continue to see demand for semi-insulating wafers for wireless RF devices and believe that we have a strong opportunity for market share expansion. However, this is gated primarily by our ability to obtain export license, which came in light in Q1.

Finally, our raw material business continue to be a crown jewel in our growth strategy. We're pleased to report that our subsidiary, JinMei, has begun to refine high-purity Indium, which gives us direct control of a guaranteed supply of another critical material for our Indium Phosphide substrates.

We're also investing to help JinMei expand its capability so that our AXT demand grows, JinMei will continue to provide a meaningful portion of our raw material requirements. Globally, there continues to be a greater awareness of the importance of earth materials, and we are decades ahead of the curve in developing our unique integrated supply chain. We continue to invest in our portfolio as we believe it's a major competitive differentiator.

In summary, we believe AXT is entering one of the most consequential chapters in our company's history. The investment we are making today in capacity, in technology and in our unique integrated supply chain positions us to meet the extraordinary demand we see building across the optical and AI infrastructure markets.

Our customer engagement is deepening our visibility, is improving and our competitive differentiation is strong. While we remain disciplined and thoughtful in our execution, we're confident that the groundwork laying out now will enable us for meaningful growth in the years to come.

With that, I turn the call back to Gary for our second quarter guidance. Gary?

Thank you, Morris. To reiterate a couple of key points from Morris's commentary, we are seeing a strong increase in our Indium Phosphide wafer demand related to AI and the ongoing data center upgrade cycle. Given the geopolitical complexity surrounding this market trend, our customer base is diversifying and expanding, and customers are placing longer-term orders and providing greater visibility into their needs.

With all of these positive market and AXT-specific growth drivers the most significant single factor to our growth in Q2 and beyond is the success and timing of getting export permits. Therefore, guiding for future revenue is somewhat tricky for us right now as we cannot predict future timing of permits or our success in obtaining them for any customer or individual order. But drawing on what we know and what we've experienced thus far in the export permitting process, we can offer the following insight into our expectations for Q2.

As of today, we have approximately $34 million in revenue that can be realized in Q2 across our substrate product lines and raw materials for which we either already have a permit to ship or for which an export permit is not required.

We have a high degree of confidence in recognizing this revenue in Q2. We could see upside, even significant upside to this number in Q2, should we receive permits for additional orders for which we have the inventory to support. But we do not want to, but we do want to stress that the timing for permit issuance is not predictable nor in our control and doesn't align with our quarterly reporting.

We continue to focus on gross margin improvement. Further improvement depends on a number of factors, including total revenue as it relates to revenue mix by product, absorption of fixed costs and our ability to continue to drive better manufacturing efficiency.

With regards to OpEx, we expect that it will be approximately $9.3 million in Q2 on a non-GAAP basis and approximately $10 million on a GAAP basis. With these factors in mind, we expect to achieve profitability on both a GAAP and non-GAAP basis in Q2. We believe our non-GAAP net income will be in the range of $0.06 to $0.08, and our GAAP net income will be in the range of $0.05 to $0.07. We estimate share count for Q2 will be approximately 63.5 million shares.

Okay. This concludes our prepared comments. We'd be glad to answer your questions now. Tracy?

[Operator Instructions] Your first question comes from the line of Tim Savageaux with Northland Securities.

Congrats on the step-up in backlog and the strong guidance for next quarter in Indium Phosphide. I guess my first question, you mentioned backlog and customer forecast at record levels, and we certainly saw that with $100 million in backlog. With regards to long-term capacity planning with customers, are you at the point of coming to any sort of long-term supply agreements with various customers? And if so, what's the kind of, what sort of timing might you'd expect on that?

Yes. Thanks, Tim. Yes, we are talking to a number of customers right now on long-term supply agreements as we build our capacity out and try and understand where their demand is going. Nearly all of the larger customers in this space are talking to long term, talking about long-term supply agreements with us. And we expect to come to resolution with some of those in the very near future.

Great. And just following up on that, sorry, go ahead.

No. I was just saying it's your turn now Tim.

Okay. Just an update, you mentioned last quarter that you were developing some relationships with Tier 1 customers or Tier 1 suppliers who hadn't necessarily been close relationships or customers over time. I wonder if we can get an update on that. And I have one more follow-up after that.

Yes. Thanks. That's going really well, actually. We've got qualification wafers in with a lot of customers, and we're finding paths and avenues to get wafers into a lot of these Tier 1 customers. We've, as we see this market grow, there's a lot of opportunity for us. And we've said in the past that we've really been focused on these next-generation technology products, that require high-quality material that, frankly, only AXT can build and can supply.

And of course, with emerging supply chain constraints with Indium Phosphide, we are in the strongest position to grow capacity. So, we're qualifying and we're supplying wafers to a lot of new Tier 1 customers in this field. So, it's exciting times for us.

Yes. I want to add one point because I think Tim, you are the friend's soldier, you're talking to them. But from my perspective, I started to hear, let's say, three months ago was some of the Tier 1 customers. But now I'm starting to hear even add on to it, is the end hyperscalers we're hearing. In other words, the customers' customer, the end users are also interested in seeing how we develop the supply chain guarantee for their growth plan.

Yes, that's correct, Morris. That's a good point. So, there's been a lot of press releases out about long-term supply agreements into our customers from the hyperscalers and from the hardware companies. And there's been a lot of encouragement from those hyperscalers and hardware companies for their suppliers to enter into long-term supply agreements with AXT.

So that is actually driving a lot of the discussions, I think, that we're having on long-term supply agreements. And of course, it's given us a lot more visibility into what the market demands are at the hyperscaler side of things, and how that trickles down to demands for AXT. It also gives us a lot of visibility into technical demands as we move forward into high-end lasers and detectors in these new products.

Great. And that makes sense and maybe somewhat related to those discussions. I'd be interested in an update on what you're seeing in terms of pricing for Indium Phosphide substrates.

Yes, that's a good question. Again, thanks, Tim. So what we are doing is we are raising some of our prices. We're seeing some recent pricing increase in raw materials and specifically with Indium.

So we're having conversations with our customers to align our costs and maintain gross margins, maintain or grow gross margins. We're also starting to globalize or we've been globalizing our pricing. Obviously, certain geographical regions have been more aggressive in the past on price targets, especially when we're looking at the lower-end markets such as GPON. So we're starting to globalize our markets so that it is more standardized across those geographical regions.

Well, let me add on to that. I think, nevertheless, I think the pricing opportunity for us, I believe, is also the fact we're migrating more towards larger size. As you know, some of the smaller size, they are more traditional they are more price sensitive and they have more competitors who can fill that shoes. But when you get to 4-inch and 6-inch and then as well as higher specification requirement, then we can really demand that's where our product shines.

Your next question comes from the line of Matt Bryson with Wedbush Securities.

Great results. I just wanted to hone in on the gross margins a bit. Obviously, you saw a pretty big uptick in Q1. I'm not quite getting to the peak you had in Q2, in Q2, I'm not quite getting the peak back in the COVID time frame, but I'm getting pretty close. I guess, could you talk a little bit about how much of that is higher utilization levels versus how much of it is increased pricing and whether my math is roughly accurate?

Well, for Q1, there is some that's a result of increased pricing, but it's the primary drivers are the traditional 2 drivers that we highlight. One is volume is up and the other is the mix is rich towards Indium Phosphide. As a matter of fact, if you look at it percentage-wise, Indium Phosphide was just a tad north over 50% of total revenue. So it's really helped in that. The pricing effects are being put in place, but we'll see them, we'll see the impact from your viewpoint, Matt, for your eyes, your eyes shall see that later this year.

Just Q2, Gary, if I said that the gross margins are coming in roughly around 40%. Is that in the ballpark? And again, can you just talk to how much that's mix versus utilization versus pricing?

Yes. I don't have your forecast in front of me, but I think that's too aggressive. And you know us, we like to take, be a little bit more conservative. So we're definitely going to be crossing the 30% threshold, which we said for several years, if we can get to $30 million in revenue and have a good mix, and we could be above 30% in gross margin. So, but I would. I think you're probably, it's up to you, but I'd encourage you to maybe knock that down a bit. We can talk about it maybe later. So, but having said that, we're both on the right direction. Gross margins should go up, and we feel very confident that they will. And how fast and what we calculate is to be determined. But all the indicators are exactly what I've been saying for many years now, and the mix is rich for Indium Phosphide and the volume is up. And so it's a unique sort of transition for us that's inside the company, we're very pleased, very pleased.

Yes. I do want to add other point about this. I mean, obviously, Gary, you own the gross margin calculation. But I would argue the supply chain strategy will start to shine. I always say the AXT is like a choo-choo train with the locomotive. We're chugging along when we are accelerating all the box behind us, such as our JinMei, BoYu, which makes our crucibles, high-purity materials, et cetera, they all going to chug along with us. When we slow down, of course, they will crush against us. But right now, it's a good time. We're chugging along very strongly. So you're going to see their contribution to our ability to make profit will grow, too.

And then just my one follow-up is, I noticed going back to the last filing that you've got export licenses, I think, for every geography, except for the U.S. just any more thoughts on getting licenses for shipping in the U.S.? And how important is that in terms of being able to fully utilize that additional capacity you're bringing on?

I don't think we're giving up the United States. No. It's still pending.

Right. We're still Matt, we're still being encouraged to apply for export permits for U.S. customers, both in the U.S. and in other global regions. So at the moment, obviously, we're getting, are getting permits pretty readily for U.S. customers based in other global regions. But that as Morris said, that doesn't mean that we are completely stopping any work on trying to obtain permits for the U.S. We've been commented or we've been contacted by the Ministry of Commerce in China on a number of U.S. applications right now to submit more data that gives us an encouraging sign that they're still looking at U.S.-based permits, and there's still a possibility to get a permit for the U.S. in the near future. as I say. So we are definitely looking at that avenue.

And in the meantime, we are supplying wafers globally to other regions as well. So this is a very global supply chain, and it's a very global market. And I think we're taking advantage of all the avenues that we can.

Yes. And I didn't mean to intimate that you weren't getting, going to get a U.S. permit or were still working on it. I just want an update and that was an update.

[Operator Instructions]. Your next question comes from the line of Charles Shi with Needham.

I want to ask you more about the capacity and the capacity build plan here. I think your last COVID high for Indium Phosphide quarterly record was $17.7 million. That was achieved in second quarter 2022. You're basically implying you're going to be at or above that level in this coming Q2.

But I recall back in 2022, you probably also built above that 17.7 because back then, you thought you would have Indium Phosphide demand from the premium electronics company for smartphone applications.

So, I want to ask you this, what's the max factory output for your existing factory today? How utilized is the existing factory? And what's the expected capacity factory output once you add the next 2 factories. I mean, I think that's something you talked about after the follow-on offering. And if you can provide any color on the numbers, that would be great.

Yes. I usually take the last digit out. We usually say our highest Indium Phosphide revenue per quarter was $17 million. You have a very good memory, okay? And we did say in Q4, we said we have increased our capacity by about 25% in Q4 of 2025. And in 2026, we're going to double that, okay? So in my calculation, our own capacity planning, we think we're going to get about $35 million per quarter capability by the end of 2026. Okay? But don't forget, that's the end of 2026.

In other words, the capacity are increasing every month, every time as we talk about, look, I mean, in the next quarter, our Indium Phosphide revenue is going to be up and beyond the $17 million per quarter.

Will be a new record.

Will be a new record in Q2, okay? But the other capacity we also mentioned about is that we are acquiring other piece of land near our existing factory in Beijing right now, which is, we're in the process of negotiating buying the land and doing the design, and we're probably going to start building it. But because it's a greenfield, it will probably take us about a year, maybe 1.5 years to complete that expansion, okay?

However, our capacity expansion is sort of in stages. For instance, our, sometimes the clean room is the most critical because if you don't have the clean room, you don't have no space to put in your machine. So that's very digital. And, but some of the crystal growth capacity is more incremental, okay? So right now, the clean room capacity is greater, much greater than our crystal growth capacity.

So as we speak now, we're increasing our capacity sort of gradually. So, but I think in the next year or so, once the greenfield is up for construction, then I think it would be more digital to expand our clean capacity. I mean, do you have anything to add, Tim?

Yes. So I just want to add a little bit. Morris talked about doubling our capacity to a rate of $35 million per quarter in Indium Phosphide by the end of this year. Remember, that's in a brownfield site that was once a crystal growth facility used for Gallium Arsenide. And as we relocated gallium arsenide, we've been able to move into that. So we've been extremely fortunate that we're in a position, I think, that nobody else in the Indium Phosphide world is in that we can double our capacity so quickly.

Looking into the next growth, as Morris just mentioned, we are, we're acquiring a facility, which is right next door to us. Again, extremely fortunate., building is already there. And that allows us to double yet again. So by the time we've completed that expansion, which should be by the end of 2027, maybe early 2028, we should be at the region, of somewhere in the region of $65 million to $70 million of capacity per quarter. So that really takes us to the type of capacity that we're expecting to see in our existing locations.

And then as Morris mentioned again in his call or in his script, as we talked earlier, we're now looking at where we need to go from here. So we're looking at other opportunities and other ways to expand beyond that probably in a greenfield site somewhere else.

Yes. And that's for 2028.

Correct.

So let me be a bit more specific as sort of the detailed guide, but $17 million, which we've already achieved. By the end of this year, we'll be at $35 million.

Per quarter.

So that's times 4, $135, $140 million.

Per quarter?

Per year. Yes. So we'll have that capacity at the end of 2026 to do $140 million.

But you cannot do that because the capacity is continually increasing. You can't use that.

It's analog. A year later, it will be $280 million. So it's double, double, double.

Maybe a follow-up on the capacity expansion, right? I think this is not like I come up with a question, but investors do ask this question. When you think about your capacity expansion, why can't you do the China plus 1 type of strategy like many companies in the global economic, electronic supply chain, like maybe you should continue to build in China, to satisfy China demand, but can you build outside of China, maybe to supply to the rest of the world?

And I know this is more, this is an easier step than done. There are policy reasons that may stop you from doing that. But is there anything you think from a business perspective that is preventing you from doing that and why?

Well, there's certainly a lot of opportunity, both within China and outside of China for us to consider that. And as I said just now, we're looking to build more capacity in 2028 and beyond, which is going to be meaningful capacity expansion in 2028 and beyond. And as part of that plan, we are working closely with our customer base to understand the long-term requirements and aligning the plans globally, right?

So, our recent capital raise will be fundamental to expanding as we enter this next growth plan, which could include more capacity within China, potentially also with capacity outside of China.

Yes. So, I do want to add one point. I know you don't want me to say this, okay? I tell you, important thing to answer to investors is that adding capacity versus able to deliver wafers is two different things. You're going to hear a lot of people who are going to say, I'm going to add capacity. Look, Indium Phosphide, I tell you, it's not easy. And one question a lot of investors are asking me is you're going to double your capacity, why don't you triple or quadruple. Our need is 10x. It's not easy.

Morris, that's a really good point. And that's really why our focus on the next two years has been focused on Beijing and increasing the capacity on our existing Beijing, Tongmei site. That is the minimum risk that we can absolutely take to get wafers out, not just to increase capacity.

Well, not only that, it's also for the good of our customers. Their demand is so aggressive, the better way or the guaranteed way to satisfy that capacity and we're stretching, we're working very hard to answer their demand is to do now, okay? Do we have other plans? You bet. We do. We're stepping up, don't forget.

Yes. Thanks, Morris. Like I said, easier said than done. Just felt like that's a question so common that I have to ask. So maybe last question. You talked about 6-inch versus maybe 4-inch or below. What's the shipment or maybe shipment is a bad metric here. But what's in the backlog that you are seeing the mix between 6-inch and 4-inch or the low right now? And I want to get some thoughts around that. And if you can, also, we're kind of curious about the mix between Iron-doped and Sulfur-doped is for laser, the other is for photodetector. I want to get some thoughts on what's the mix expected mix within that $100 million plus backlog. That's the last question.

So iron doped is coming up big time. we used to see about 10:1 in favor of sulfur doped prior to this. Right now, I would say the mix, especially the large diameter, it's almost like iron is 40%, 60%, correct, Tim?

Yes. So when we look at backlog and we look at customer demand over the next few quarters into next year and beyond, what we can see is there's still a lot of 3-inch out there, specifically for the laser. So sulfur doped is still going strong on 3-inch. There is a transition to 4-inch on N-type material for the laser, whereas the high-speed detector, frankly, has pretty much all transitioned to 4-inch already. So we're seeing still a lot of 3-inch coming along, a lot of transitioning over to 4-inch. And as we look into the future, of course, 6-inch is incredibly important. And there's a lot of interest and a lot of opportunity out there for 6-inch.

But I'll say at this moment in time, a lot of the production that we're seeing and a lot of our capacity that we're seeing is still focused on the 3-inch and the 4-inch with a longer-term plan to transition to 6-inch within the next probably year or so.

Yes. The signals are obviously very strong. A lot of customers are telling us, can we get more 4-inch, okay? And 6-inch is actually a little bit more out, but people are warning us it's coming, it's coming, okay? But 4-inch is real. And I would say the ratio for inch 3-inch and 6-inch right now is maybe 4:1 in favor of 3-inch. And I think going out in about 6 months to a year, it could be, I mean, as far as wafer number is concerned, it becomes probably 2:1 in favor of 3-inch. 3-inch is still the majority, the larger, the numbers. But because 4-inch is actually at a lower number right now, so it's going to grow very rapidly in the next coming quarters.

Your next question comes from the line of Richard Shannon with Craig-Hallum.

A couple of questions here. I'd love to understand how do we think about the CapEx requirements here for these capacity builds? You talked about a brownfield one this year that's doubling. And then a greenfield one, I think that's going to happen in '28 or maybe in '27, maybe going into '28 here that's more greenfield. Wonder if you could give us some numbers or at least some statistics to think about what that's going to require and over what period of time?

Well, for this year, it's mostly adding high-tech growth equipment for crystal growth. So furnaces, some back-end stuff for polishers. But as Tim and Morris have said, we have an existing footprint. That's one reason we think we have an advantage. Our current Indium Phosphide Crystal growth site has room for more furnaces.

And as Tim explained, we're repurposing our gallium arsenide crystal growth that was in Beijing for even more. So this year, it's compared to the future years, it's probably going to be $35 million in CapEx, maybe $30 million, maybe $40 million, somewhere in that range. And to be honest, we'll spend as much as we can, as fast as we can because we're uniquely positioned to be able to add capacity quickly. So next year. Let's see. I think as we, it's depending on which things we're talking about. Tim, do you want to, you've got split up in your paperwork there, but.

Yes. I think as we go into next year and we look at building out this facility next door to us, obviously, buying a new facility, doubling our capacity again there and also building some capacity through our supply chains as well. I think we're looking somewhere in the region of about $100 million or so.

And then beyond that, if we were to build a greenfield site somewhere else, I think we're looking at somewhere in the region of $220 million to $250 million, depending on obviously what capacity we put in that greenfield site. But again, I think if we're putting a meaningful capacity there, you're looking at $200-plus million.

Fair enough. I want to ask on your Indium Phosphide business here by geography. You made a couple of interesting comments here. Last call, you said China was going to grow about 60% this first quarter, and then you said it actually was up 100%, if I caught you correctly, it's going to double again here in the second quarter. What kind of percentage of Indium Phosphide business in the second quarter is China going to be?

That's a great question. So I think we're seeing a lot of growth in China, and it's not just because we're seeing data center growth in China, but we're seeing China enter the global supply chain market for optical transceivers and potentially co-packaged optics as we go forward.

So again, remember, this is fully globalized and a lot of those transceiver companies that manufacture their transceivers within China are driving to a Chinese supply chain of laser diodes and photodetectors.

So in Q2, we estimate that the Chinese demand is probably about 30% of the overall Indium Phosphide global market demand that we're seeing. And we're seeing that increasing through, certainly through Q3 and Q4 as well. So as we get into Q4, it could even be as high as something pushing up to 40% share of the total Indium Phosphide market.

That is helpful, Tim. And I'll ask one last question and jump out of line here, and that's on the topic of gross margins. Gary, you've talked about in the past here, with hoping to get to 35% with kind of an upside goal of looking at 40%.

But when you're talking about the pretty strong mix shift towards Indium Phosphide here and even about price increases here, I would imagine you maybe help us think about whether that could go higher at some point in time. I'm not asking for anytime soon, but are you looking for kind of a ceiling of gross margins that get us above that 40% level?

Well, internally, as a management team, we're definitely going to be targeting something that begins at the 4%, but it's far out. We don't know yet. And so, I'd still stick with my sense that somewhere in the 35% range is very, very reasonable. But that's for the outside world. It's a safe arrival landing point. But that doesn't mean that we're satisfied with it, and we think we can do better, but let's, we need to get it further down the road and prove that first.

There are no further questions at this time. I will now turn the call back to Leslie Green, Investor Relations at AXT for closing remarks.

Thank you, Tracy, and thank you all for participating in our conference call. We will be participating in the B. Riley Securities 2026 Annual Investor Conference and the Craig-Hallum Institutional Conference in May as well as the Northland Virtual Conference in June. We hope to see many of you there. And as always, feel free to contact us if you'd like to set up a call. We look forward to speaking with you all in the near future. Thanks.

This concludes today's call. Thank you for attending. You may now disconnect.

Good afternoon, everyone, and welcome to AXT's Fourth Quarter 2025 Financial Conference Call. Leading the call today is Dr. Morris Young, Chief Executive Officer; and Gary Fischer, Chief Financial Officer. In addition, Tim Bettles, VP of Business Development, will be participating in the Q&A portion of the call. My name is Audra, and I will be your coordinator today. I would now like to turn the call over to Leslie Green, Investor Relations for AXT. Please go ahead.

Thank you, Audra, and good afternoon, everyone. Before we begin, I would like to remind you that during the course of this conference call, including comments made in response to your questions, will provide projections or make other forward-looking statements regarding, among other things, the future financial performance of the company, market conditions and trends, emerging applications using chips or devices fabricated on our substrates, our product mix, global economic and political conditions, including trade tariffs and import and export restrictions, ability to obtain China export permits, timing of receipt of export permits our plan to list our subsidiary, Tongmei in China, our ability to increase orders in succeeding quarters to control costs and expenses, to improve manufacturing yields and efficiencies or to utilize our manufacturing capacity.

We wish to caution you that such statements deal with future events, are based on management's current expectations and are subject to risks and uncertainties that could cause actual results or events to differ materially. In addition to the matters just listed, these uncertainties and risks include, but are not limited to, the financial performance of our partially owned supply chain companies increased environmental regulations in China.

In addition to the factors just mentioned or that may be discussed in this call, we refer you to the company's periodic reports filed with the Securities and Exchange Commission. These are available online by link from our website and contain additional information on risk factors that could cause actual results to differ materially from our current expectations. This conference call will be available on our website through February 19, 2027.

Also, I want to note that shortly following the close of market today, we issued a press release reporting financial results for the fourth quarter of 2025. This information is available on the Investor Relations portion of our website. I would now like to turn the call over to Gary Fischer for a review of our fourth quarter results. Gary?

Thank you, Leslie, and good afternoon to everyone. Revenue for the fourth quarter of 2025 was $23.0 million compared with $28.0 million in the third quarter of 2025 and $25.1 million in the fourth quarter of 2024.

To break down our Q4 '25 revenue for you by product category, indium phosphide was $8.0 million, primarily from data center applications, gallium arsenide was $7.0 million, germanium substrates were $231,000. Finally, revenue from our consolidated raw material joint venture companies in Q4 was $7.6 million.

In the fourth quarter of 2025, revenue from Asia Pacific was 81.5%, and Europe was 17.5% and North America was 1%. The top 5 customers generated approximately 22.6% of total revenue and no customers were over the 10% level.

Non-GAAP gross margin in the fourth quarter was 21.5%. For comparison, we reported 22.6% gross margin in Q3 of '25 and 18.0% gross margin in Q4 of last year. For those who prefer to track results on a GAAP basis, gross margin in the fourth quarter was 20% -- 20.9% compared with 22.3% in Q3 of 2025 and 17.6% in Q4 of 2024. We continue to be highly focused on driving continued improvement, including further recovery in Q1.

Moving to operating expenses. Our total non-GAAP operating expense in Q4 was $7.8 million, compared with $6.5 million in Q3 of 2025. As a reminder, Q3 included some favorable adjustments in R&D that brought our OpEx down to a lower-than-normal level. Non-GAAP OpEx in Q4 of '24 was $9.8 million.

On a GAAP basis, total operating expense in Q4 '25 was $8.8 million compared to $7.3 million in Q3 and $10.6 million in Q4 of 2024. Our non-GAAP operating loss in the fourth quarter of 2025 was $2.6 million compared with the non-GAAP operating loss in Q3 of 2025 of $384,000 and a non-GAAP operating loss of $5.4 million in Q4 of 2024. For reference, our GAAP operating line for the fourth quarter of 2025 was a loss of $3.8 million compared with an operating loss of $1.1 million in Q3 of 2025 and an operating loss of $6.2 million in Q4 of 2024.

Nonoperating other income and expense and other items below the operating line for the fourth quarter of 2025 was a net gain of $285,000. The details can be seen in the P&L included in our press release today.

For Q4 of 2025, we had a non-GAAP net loss of $2.6 million or $0.06 per share compared with a non-GAAP net loss of $1.2 million or $0.02 per share in the third quarter of 2025. Non-GAAP net loss in Q4 2024 was $4.2 million or $0.10 per share.

On a GAAP basis, net loss in Q4 was $3.6 million or $0.08 per share. By comparison, net loss was $1.9 million or $0.04 per share in the third quarter of 2025. GAAP net loss in Q4 of 2024 was $5.1 million or $0.12 per share. Weighted basic shares outstanding for the quarter was $44.7 million.

Cash, cash equivalents and investments increased by $97.2 million to $128.4 million as of December 31. This is primarily the result of our public offering of common stock, which closed on December 30 and generated approximately $93.9 million. By comparison, at September 30, cash was $31.2 million, accounts receivable decreased in the quarter by $2.6 million.

Depreciation and amortization in the fourth quarter was $2.3 million. Total stock comp was $1.3 million. Net inventory was up by approximately $4 million in the fourth quarter to $81.7 million. This continues to be a focus for us, and we expect to bring it down in coming quarters.

This concludes our discussion or comments about the quarterly financials, turning to our plan to list our subsidiary, Tongmei in China on the STAR Market in Shanghai, we remain very interested in completing the IPO, particularly in light of the rapidly evolving AI infrastructure build-out in China, which is fueling increased China-based demand for indium phosphide substrates. We've continued to keep our IPO application current, and Tongmei remains in process as part of much of a more selective and smaller group of prospective listings than a few years ago.

Though the current geopolitical environment is dynamic, Tongmei is considered a Chinese company and continues to be regarded in China as a good IPO candidate. We will keep you informed of any updates. With that, I'll now turn the call over to Dr. Morris Young for a review of our business and markets. Morris?

Thank you, Gary.

[indiscernible] interruption, this is the operator. We have lost our speakers. Give me one moment to reconnect.

[Technical Difficulty]

Let me start on the beginning again, just in case I missed part of it.

We were disappointed that we didn't receive as many export permits in Q4 as we had hoped. Based on the average processing time we had seen up to that point in October. The good news is now that we have received permits in Q1 and we are in a stronger position today than we were at the same time in the prior quarter.

Gary will take you through our full quarter guidance in a few minutes. But we do expect to achieve sequential growth in revenue in Q1, driven primarily by growth in indium phosphide for data center build-out for AI.

We're also very pleased to note that we are seeing a work expansion of our customer base for indium phosphide. We're beginning to support leading customers in the optical space that we have not -- we have limited exposure to prior to this time. This includes Tier 1 laser manufacturers and optical transceiver module makers, both in China and around the world. We're excited to be able to demonstrate the technological advantage of our low EPD wafers as the market moves to optical devices with higher speed and greater sophistication for both scale-up and scale-out applications.

In total, our backlog for indium phosphide wafers have reached a new high of over $60 million. As we mentioned last quarter, customers are planning for longer lead time by placing longer-term motors and giving us more visibility into their expected demand. As many of you know, the supply chain for optical transceiver is quite complex and highly globalized. We believe this geographical interdependence is providing both opportunity and incentives for the ecosystem to work together in new ways to solve global supply chain shortages.

Beyond pluggable receivers, we are seeing a very large developing market for co-packaged optics for both scale-up and scale-out applications. We're actively engaging in discussions with our customers about their technical and timing requirements and believe this could be -- represent yet other inflection point in our business developing in late 2027 and beyond.

For geographic demand perspective, the massive AI infrastructure build-out and planned CapEx spending by cloud services and AI platform providers in the United States is the primary driver for [ EML ] and silicon photonic-based optical transceivers. We believe that today, our materials are being used in multiple U.S. hyperscale and we expect that end customers use will continue to broaden.

In China, the data center build-out is early in its ramp. But we are seeing rapid growth as China moves to accelerate its data center expansion and AI capabilities. Our revenue related to the data center market in China are expected to grow by more than 60% in Q1 over Q4. Highlighting both increased investment in these Tier 1 data centers as well as the strong desire for Chinese domestic suppliers to secure local stores at every level of the AI infrastructure supply chain.

Given the strong demand environment, it is important to note that AXT is well positioned to handle increased demand for indium phosphide wafers. Since we have last reported to you in October, we have already added approximately 25% more capacity, and we are on track with our current plan to double our capacity from Q4 2025 level by the end of this year.

Beyond our current plan for capacity expansion, we're working closely with our customer base to understand their long-term requirements and to align our plans globally. Our recent capital raise will be fundamental to our future expansion as we enter our next significant phase of growth.

A major focus of this expansion will be an increased investment in our 6-inch indium phosphide product, and we are excited to work with our customers to meet the rigorous requirements of next-generation and co-location space devices.

Now turning to gallium arsenide. We continue to see demand for semi-insulating wafers for wireless RF devices and believe that we have strong opportunity for market share expansion gated primarily by our ability to obtain export permits. In we saw an uptake in semiconducting wafers for both industrial laser applications and data center laser applications. VCSEL lasers a data center for data center applications typically do not require a lot of gallium oxide material. As the device are small, so they don't move the middle much as a growth driver for us.

However, we are seeing increased demand for VCSEL for autonomous vehicles in China -- Chinese automobile market, which is currently expanding rapidly. High-growth expenses, in addition to our watching we are watching with interest an emerging application in robotics for VCSELs that increase the physician and dexterity of a modern robotic hand.

Counter the VCSEL used in data center applications, machine mission VCSELs tend to be very large and use more gallium oxide substrate. They also require high-quality material which we are very well positioned to supply. Again, demand is more today, primarily China-based and covers a diverse set of customers but the breadth of use case and the development is very exciting.

Finally, our raw material business is -- was up in Q4 with growth from our subsidiary volume, which manufactures [ pBN ] crucibles used in manufacturing of indium phosphide crucibles. In addition, we're pleased to report that our subsidiary, JinMei, has begun to refine high-quality indium, which gave us -- now direct control of a guaranteed supply of yet the other critical material for our indium phosphide substrates.

Globally, there continues to be a greater awareness of the importance of various materials, and we are ahead of the curve in developing our unique integrated supply chain.

In closing, this is a very dynamic and exciting time for our company as we enter into 2026 we're a fundamental supplier to the multiyear optical build-out in the AI infrastructure market. We have a broadening customer base of Tier 1 companies and a strong balance sheet to support our continued business expansion.

And with growing backlog the receipt of indium phosphide and gallium arsenide export license remains the single most significant gating factor for our growth. As such, we are highly focused on ensuring that we are proactive, organized and disciplined about managing the process on behalf of our customers.

We also know that we must be laser-focused on running our business with the greatest efficiency. This includes our continued effort to drive gross margin improvement, OpEx discipline and inventory reduction.

With strong ongoing market trends fueling the data center upgrade cycle we believe that we have tremendous opportunity in 2026 to drive meaningful growth in our business and return to profitability.

I would like to personally thank our employees for their dedication and tireless efforts during this singular moment in AXT history and while we also like to express my sincere gratitude to our customers, partners and shareholders for their ongoing support and believe that in the future, we are building together. We look forward to reporting to you on our progress. And with that, I will turn the call back to Gary for our fiscal quarter guidance.

Thank you, Morris. To reiterate a couple of key points for Morris' commentary, we are seeing a strong increase in our indium phosphide wafer demand related to AI and the ongoing data center upgrade cycle. .

Given the geopolitical complexity surrounding this market trend, our customer base is diversifying and expanding and customers are placing longer-term orders and providing greater visibility into their needs. With all of these positive market and AXT specific growth drivers, the most significant single factor to our growth in Q1 and beyond is the success and timing of getting export permits.

Therefore, Guiding for the future is somewhat tricky for us right now as we cannot predict future timing of permits or a success in obtaining them for any customer or individual order. But drawing on what we know and what we've experienced thus far in the export permitting process, we can offer the following insight to our expectations for Q1.

As of today, we have approximately $26 million in revenue that can be realized in Q1 across our substrate product lines and raw materials, for which we either have already have a permit to ship or for which an export permit is not required. We have a high degree of confidence in recognizing this revenue in Q1.

We could see significant upside to this number in Q1, should we receive more permits for additional orders between now and the end of the quarter. But we want to stress that as we experienced in Q4, the timing for permit issuance is not predictable nor in our control and doesn't necessarily align with our quarterly reporting.

As Morris mentioned, we continue to focus strongly on gross margin. Further improvement depends on a number of factors, including total revenue as it relates to absorption of fixed costs, revenue mix by product and our ability to continue to drive better manufacturing efficiency.

With regards to OpEx, we expect that it will remain at approximately $9.0 million in Q1. With these factors in mind, we believe our non-GAAP net loss will be in the range of $0.02 to $0.04 and GAAP net loss will be in the range of $0.04 to $0.06. This represents substantial year-over-year progress towards our return to profitability. We estimate share count in Q1 will be approximately 53.2 million shares. Okay. This concludes our prepared comments. We'd be glad to answer your questions now. Audra? Operator?

[Operator Instructions] We'll go first to Richard Shannon at Craig-Hallum.

Gary, I'm going to do a quick request to give me the revenue number you gave for the quarter. It got my line got garbled here. I heard about '26 that you believe you can get highly likely to get. Was there a number to the upside there? Apologies for needed to ask this.

We normally give you guys a range, but we discussed before the call today that we're very, very confident at the '26 number. We did say just a moment ago that we believe we could go higher if we get more permits, but we it wouldn't even -- it could even be more than just a normal range, which we usually have a $2 million or $3 million range for you guys.

Well, let me try to add on to this point. That is -- our manufacturing are doing the manufacturing as if we can get a permit. So there is a lot of these so-called [indiscernible] finished goods, or finish good staging in our clean room ready to be shipped if we can get an actual permit.

Yes. We are building to forecast and to the backlog, whether or not -- we're not building to permits. We're not waiting until we get a permit and then say, okay, let's get going. And so it's building and we're enthusiastic, we're excited and of course, yes, we're a little bit frustrated because it would be pretty big numbers that we can get some more of these permits. And we think that we will. We can comment more on this call, but we're hanging in there. We're not discouraging giving up.

Okay. I appreciate understanding your approach to the guidance and it certainly makes a lot of sense in this environment. Let me ask about the licensing process here. Last quarter, you said it was about a business day or a 3-month process here. And obviously, that didn't turn out as we saw from your pre-announcement, which is unfortunate, but we all know how governments can work from time to time here. Have any new insights as to how they're working here? And I guess, are there any permits that are being rejected that you don't think should be? Just more insights here on this licensing process.

Yes, I can answer that one. So this process is not transparent at all. And we're seeing quite a lot of variability. We started off in the end of Q3 by saying it was looking like we're seeing a fairly consistent 60 business day process cycle. We're now seeing a lot more variability as we go through there. And as I say, there's just no transparency to that.

It's reasonable to assume that there's geopolitics playing into this as well. It's really hard to determine what and why. And it's difficult, therefore, to figure out which permits are coming in on time, which are taking longer.

I'll answer the second question as well, which you asked whether there had been any permits that have been denied and why? We have actually received a couple of denials with the instructions that we can resubmit that application with more information. So this is the first time we've actually received denials on permits and we're not totally sure why, again, no transparency to this. We don't see any particular reason why any of these permits should not be approved. And it's a process that we're just working through.

So these permits that have been denied, we've already resubmitted with [ MOCOM ] and we're hopeful that we continue to talk to [ MOCOM ] and they will get reviewed quickly and could potentially turn around fairly quickly. I could even make an impact on Q1 numbers if we can get a quick turnaround on them.

And what does MOCOM stand for?

That's a Ministry of Commerce in China.

Yes. So let me add what optic viewpoint, the comment about the team just give you. That is -- although there is a denial of an application, but they come with a specific instruction how to strengthen the application, which we think is a good indication. In other words ,if they really want to deny this is one of -- they can just let it sit there. I mean the fact that they want more information about -- actually, I think it's a fixable permit application we have. And that means, hey, they are taking a very serious look at it. And hopefully, that will turn to be approved.

Okay. That is helpful. Second question here is kind of the backlog here and also following up on more of your comments about customers booking further out. So we went from a backlog of [ 49 to above 60 ] here, and you also commented that people or customers are ordering further out. Could you suggest how far out they're going right now? And also, how far out are you hearing forecasts from these customers as well?

Yes. Let me see how to answer that. Actually, let me first answer my part of the question, and I will turn it over to Tim. Well -- and the reason why that Tim really works with customers hearing what their demand is actually Well, the interesting comment we have was that we have important meetings with our customers this week, and they're telling us -- Tim at least in two occasions, people are saying, gee, our demand forecast increases every week. So that's the kind of level. I think -- I mean we know it is tight and we know it's going up. But I think people are upsizing their demand, and they're telling us what they want to do, whether they're going to go to [indiscernible], how much they want to switch on 3 to 4 and 4 to 6, okay?

And as far as how much inventory they are building, I think that depends upon customers. Some of the customers, we suspect they're buying into the inventory. But they also tell us I'm going to take it all in consider whereas others, I think they are telling us the real demand in the quarter because I think as of now, we cannot deliver enough of their demand. So they are giving us longer lead time to give us more incentive to build up the expansion plan and build the capacity for them. And also, I think the other thing is, Tim, you want to comment on long-term commitment that you're talking to a customer about?

Yes, I definitely -- I'll comment a little bit on that, and I'll also comment a little bit more on backlog and what we're seeing from this. So a lot of this backlog, remember, is scaled up based on the permit dynamics, right? So the permit dynamics, once we receive a permit to export material we have a 6-month window to export. So a lot of backlog is built at the moment that permit comes in, we have a 6-month window maximum to deliver. And in many cases, that window, the window of which the customers are looking to receive material is a lot shorter than 6 months. So really and truthfully, this is all being gated by permits, as we mentioned during the discussion. .

In terms of what we're seeing in build-out for inventory, I think at this moment in time, people would like to keep more inventory. But as Morris mentioned, just about everybody we're talking to is telling us that the demand is growing literally on a weekly basis. So we just see the numbers expanding and expanding over and over.

Now turning to forecast and what kind of visibility we have we are definitely talking about long-term supply agreements with a number of customers right now. And we're planning our business according to those long-term supply agreements.

We're seeing forecast out beyond 2030 for many of these customers, but of course, as I've just said, those numbers are increasing on a week-by-week basis. So it's difficult to keep track of things, but people are talking about minimum demand requirements. Moving forward for at least the next 2 to 3 years, given its forecast out beyond 2030. So all in all, I think this backlog is real. It's achievable, and it's kind of being limited by our permits at the moment.

Makes sense. I'll ask one more question and jump out of line here, guys. This is on capacity additions. Just a few kind of multipart question here. I think I heard you say you're going to double your capacity from the end of '25 to the end of '26. If you could verify that? And if so, can you help us understand what level of CapEx is going to be requiring?

And then looking beyond that, and Tim, you just mentioned forecast going out beyond 2030, which is interesting to hear, how much more capacity beyond that could you need? Let our minds wonder about what kind of scale an opportunity you're thinking about here?

Yes. I think we just said we have increased our capacity by 25%. And now, and we do expect to double our capacity by the end of this year, okay? And how much budget would we need? It could be about $30 million, and that is sort of on the low end in a way because the first phase of the expansion, which is doubling our capacity mainly use brownfield. In other words, existing Tongmei facility, we already have a clean room available. We have the building there already and power supply and water. So I think that budget is lower.

Looking beyond 2026, we are looking at possibly doubling it again in 2027. And that budget is lining somewhere around $100 million to $150 million depends upon how we want to build it because then we are talking about a greenfield. We need building, we need clean we need power, et cetera.

We'll move next to Tim Savageaux at Northland Securities.

Let's continue with that capacity discussion, but maybe try to put some numbers around it. If I look at where you've peaked historically, and I think we're talking exclusively about indium phosphide here, that's getting up towards $20 million a quarter in substrate revenue and I imagine your capacity is now slightly above that, given the increase you talked about in Q4.

I guess question one, is that reasonable? And should we expect you to exit calendar '26 with revenue capacity roughly double those levels? And would you anticipate having a demand of to fulfill that at that time where you're building maybe a little bit ahead.

Let me first answer the question. The -- I think we calculated -- I think it's approximately $35 million a quarter by the end of the year, run rate, okay? It could be a little bit more given the price environment is dynamic as we -- the cost of indium are going up.

And can we use up all this capacity? I think looking at the backlog, we can certainly do, but the problem is the gating factor is the permit.

I'll add something in here as well. Irrespective of permits, we mentioned we are seeing growth in this business in China as well. and look at it quarter-to-quarter, Q4 was probably double revenue in China than Q1 in 2025. And we would expect -- we're looking at potentially doubling again through 2026. So we're definitely seeing growth there in China that warrants expansion as well as growth outside of China where we would need permits for.

I agree with you, but then I don't want to minimize the importance of outside of China. But I think the AI growth budget we're seeing is really fueling the demand for indium phosphide substrates.

Yes, Tim, this is Gary. And I still speak conservative, but -- and I am. But I'm not sure you guys are getting the point is that every customer is worried about getting enough for their needs. There's a general concern. The meetings we've had this week, we're not meeting with the purchasing manager. We're meeting with CEOs and general managers. They all want to talk to Morris about capacity and about future growth.

So there's a phenomenon going on here that all of us -- it's unusual for -- no matter what we do for our jobs, including the analysts, is very unique and unusual situation. I mean I've been around the block a few times and Morris has, and this is very, very unusual. And it's actually intense. We're excited but we're scrambling. We're scrambling. And I don't see any into it near term. This is -- people are telling us that their demand is going to be going up 3, 4 or 5x over the next 4 or 5 years. And there's not how many suppliers are there. You know the answers to that, too, and we're one of them.

Yes. I think let me add to that. I think the investor usually asked the CEO, the toughest question is what keeps you up at night? I think what's keeping up at night is calculating how we're going to expand that capacity, how we're going to get that product to our customers and how to develop the technology that a customer wants. I mean it's very exciting, but it's also very training. We need to be very much aware of what the customer wants and satisfy the demand.

Fortunately, we have recent experience at adding capacity. What was almost about 10 years ago, when we learned that we needed to get gallium arsenide moved out of Beijing. And so we had 2017, '18 kind of time period where we did add capacity from green grass fields. So we have some strength here but it's going to tax us even though we are experienced.

Yes. I do want to give the analyst point to ask the question, but I think we're talking to each other.

We're excited, yes.

But I think it is a very good point. I think we -- prior to this, we probably overspend because the IPO preparation, we actually expand from one facility to three facilities. But now I think we're looking at a great demand for indium phosphide which I think it's really meeting our challenge. And I think Gary is right. We are very well positioned to meet that demand. I think we are probably the best suited to increase capacity and also because the virtual integration we have in terms of supply chain, and we're in control of a lot of other material, which cooking to supply if indium phosphide continue to grow like what we are talking about, and we have plans for that as well.

A good example is our subsidiary, JinMei. JinMei make the indium phosphide, poly, for Tongmei. So we have -- our supply chain is supporting this growth process. Next question, Tim?

I'm a little bit afraid now. But you actually you highlighted in the release even the increased presence with some big Tier 1 customers. I guess in the commentary, you mentioned maybe some in China, but elsewhere.

In terms of what's going on there? Are we talking about orders with major new customers qualification? Any specific programs? And I'm not sure these two comments were related or not. But I'll ask if they were with regard to your increased investment in 6-inch indium phosphide, if you can maybe cover both of those points. Appreciate it.

Yes. I'll take a stab at that one, Tim. So yes, we are gaining more traction with customers, as we've said on previous calls as well that we've not been so prolific in. So we are gaining design in, we're gaining qualifications on existing products as well as new products as we move forward. And the customers are looking to expand on their demand for indium phosphide. .

As Morris mentioned in the call, there's already been a big move from 3-inch to 4-inch, so we've spent a lot of time and effort on scaling up our 4-inch business. And we're also seeing a lot of interest now. And of course, we all know one customer that's really driving 6-inch demand. So we're really taking 6-inch very, very seriously. And we're expanding -- as we expand capacity both now and are doubling capacity through '26 and beyond, we're looking at adding significant 6-inch capacity in there during that expansion. And we're just plowing through the numbers right now to see what we need to drive 6-inch and how we scale 6-inch compared to 3, 4 and more of the traditional wafer sizes.

Yes. I think one part of it perhaps is the cooperative effort. Usually, when your customers don't go to me, they probably talk to the sales guy and give us orders. But I think now the dynamics is such that we sort of need to interact more to make sure that we're putting the right amount of attention both in terms of development and capacity expansion to where they need it, okay. And then virtually also to convince us, this is the right investment we should have. Is that right?

That's correct. We're also getting a lot more customer buy-in with commitments, [ NRE ] purchase orders to drive that business forward as well.

We'll move next to Matt Bryson at Wedbush Securities.

Just can you talk a little bit about what might have been unfettered demand or shipments in Q4 or what you might be guiding to if you won't restricted by permits?

If we're not restricted by permits, then the basic question is our ability to manufacture high volume because there's no issue about demand or backlog. So the variable that you're really focusing on is manufacturing capability.

Yes. I don't know whether the customers are telling us more demand than we can deliver. But I think we definitely have more orders than we can now. As we add the capacity, we're counting on who we can supply to, but of course, there's other bidding factor, which is the permits.

Got it. So I mean hypothetically, assuming you could be manufacturing around $20 million [indiscernible] fund, you could ship it all if you could get permit?

Yes, correct. And that will -- we expect it to increase it to about $35 million a quarter by the end of the year. And that we are making sure every point along the supply chain receives equal attention in terms of poly in terms of crucible furnaces, et cetera, et cetera.

Understood. And then so you're completely confident that of that $35 million in capacity, if you can bring it on and you can get permits that come to end of this year, you could possibly be shipping $30 million, $35 million in orders. I guess is there -- are there any customer commitments or [ LTAs ] or anything else that kind of solidifies that demand?

What's that turn you're seeing? LP?

We've got a lot of purchase order in that right now, and we're going through long-term agreements. Long-term agreements, I think in terms of locking up capacity are easy and we're talking to customers to lock that capacity up.

The gating factor, and we've reiterated this a lot today and previously, gating factor with long-term agreements is how much can we actually ship out of the country? What can we get permits for. So we're trying to address that through LTAs. But for sure, we can definitely cover this kind of revenue volume with purchase orders and LTAs.

And then, Gary, I think the last one I have is for you. if you get to those numbers in terms of shipments for indium phosphide, so $30 million plus, can you give us some of the parameters we should be thinking about in terms of gross margins, what are the puts and takes? And hypothetically would be able to get back to the kind of COVID era highs you're reporting back in 2021, 2022?

Yes. I mean we always like indium phosphide. And if you have to pick of our three substrate products that you want to see go through the ceiling in terms of volume and demand is the right one for us. I think getting somewhere at $40 million a quarter in aggregate, not just indium phosphide, but we should be getting hopefully somewhere close to 35% gross margin.

I will add another point. I always describe AXT, it's a fairly unique company because we I describe our substrate business as the locomotive engine in the front, but we have a lot of cars in the back following us, such as indium, such as phosphorus, quartz, [ pBN ] in crucibles furnaces we make. So if our business is good, we're pulling these guys along, and that should help us. So what you're seeing -- I'm more optimistic and Gary said, I think that 35% is the normal substrate business. If we can pull those guys along that should help us even further.

Yes. Yes. Our internal goal is higher, Matt, but -- so that we don't overstate expectations from for your community, we want to be a little bit cautious. So we're very optimistic -- so it's pretty exciting.

And just one quick follow-up. The shift to 4-inch and 6-inch does that change the parameters on a gross margin perspective?

I think normally the larger the size we go, the better the margin we will get. On the other hand, I'll be more cautious about 6 inches. We are still a little bit in development stage. So I think initially, looking at lower margin, but looking for ways to compensate that. Right Tim?

Right. Product mix is still very much geared towards 3-inch and 4-inch at the moment. And as Morris says, we're running 6-inch up. It is still a bit of a development project at the moment. It will be growing through this year. But again, remember, as we do that, 3-inch and 4-inch are still a big percentage of our business.

And that concludes our Q&A session. I will now turn the conference back over to Leslie Green for closing remarks.

Thank you, Audra, and thank you all for participating in our conference call. We will be participating virtually in the Loop Capital Conference in March and hope to see many of you there. As always, feel free to contact us if you would like to set up a call, and we look forward to speaking with you soon.

And this concludes today's conference call. Thank you for your participation. You may now disconnect.

Good afternoon, everyone, and welcome to AXT's Third Quarter 2025 Financial Conference Call. Leading the call today is Dr. Morris Young, Chief Executive Officer; and Gary Fischer, Chief Financial Officer. In addition, Tim Bettles, Vice President of Business Development, will be participating in the Q&A portion of the call. My name is Kelvin, and I will be your coordinator today. I would now like to turn the call over to Leslie Green, Investor Relations for AXT. Please go ahead.

Thank you, Kelvin, and good afternoon, everyone. Before we begin, I would like to remind you that during the course of this conference call, including comments made in response to your questions, we will provide projections or make other forward-looking statements regarding, among other things, the future financial performance of the company, market conditions and trends, emerging applications using chips or devices fabricated on our substrates, our product mix, global economic and political conditions, including trade tariffs and import and export restrictions, ability to obtain China export permits, the timing of receipt of export permits, ability to increase orders in succeeding quarters to control costs and expenses, to improve manufacturing yields and efficiencies or to utilize our manufacturing capacity. We wish to caution you that such statements deal with future events are based on management's current expectations and are subject to risks and uncertainties that could cause actual events or results to differ materially.

In addition to the matters just listed, these uncertainties and risks include, but are not limited to, the financial performance of our partially owned supply chain companies and increased environmental regulations in China. In addition to the factors just mentioned or that may be mentioned in this call, we refer you to the company's periodic reports filed with the Securities and Exchange Commission. These are available online by link from our website and contain additional information on risk factors that could cause actual results to differ materially from our current expectations.

This conference call will be available on our website at axt.com through October 30, 2026. I also want to note that shortly following the close of market today, we issued a press release reporting financial results for the third quarter of 2025. This information is available on the Investor Relations portion of our website at axt.com.

I would now like to turn the call over to Gary Fischer for a review of our third quarter 2025 results. Gary?

Thank you, Leslie, and good afternoon to everyone. Revenue for the third quarter of 2025 was $28.0 million compared with $18.0 million in the second quarter of 2025 and $23.6 million in the third quarter of 2024. To break down our Q3 '25 revenue for you by product category, indium phosphide was $13.1 million, primarily from data center and PON applications. Gallium arsenide was $7.5 million, germanium substrates were $640,000 and revenue from our consolidated raw material joint venture companies in Q3 was $6.7 million. In the third quarter of 2025, revenue from Asia Pacific was 87%, Europe was 12% and North America was 1%. The top 5 customers generated approximately 45.2% of total revenue and 2 customers were over the 10% level. Non-GAAP gross margin in the third quarter improved substantially to 22.4%, reflecting improved product mix and higher volume to absorb overhead.

For comparison, we reported 8.2% gross margin in Q2 of 2025 and a 24.3% gross margin in Q3 of 2024 last year. For those who prefer to track results on a GAAP basis, gross margin in the third quarter was 22.3% compared with 8.0% in Q2 of 2025 and 24.0% in Q3 of last year. We continue to be highly focused on driving continued improvement, including further recovery in Q4. Moving to operating expenses. Given the difficult climate, we've been working hard to hold down OpEx. In addition, we had some favorable adjustments in R&D in Q3 that brought our OpEx down to a lower-than-normal level. These will not carry over into Q4. Therefore, our total non-GAAP operating expense in Q3 was $6.7 million compared with $7.6 million in Q2 and $8.3 million in Q3 of 2024.

On a GAAP basis, total OpEx in Q3 was $7.3 million compared with $8.2 million in Q2 and $9.1 million in Q3 of 2024. Our non-GAAP operating loss for the third quarter of 2025 improved substantially to $384,000 compared with the non-GAAP operating loss in Q2 of 2025 of $6.1 million. and a non-GAAP operating loss of $2.6 million in Q3 of 2024. For reference, our GAAP operating line for the third quarter of 2025 was a loss of $1.1 million compared with an operating loss of $6.7 million in Q2 and an operating loss of $3.4 million last year in Q3. Nonoperating other income and expense and other items below the operating line for the third quarter of 2025 was a net loss of $46,000. The details can be seen in the P&L included in our press release today.

For Q3 2025, we had a non-GAAP net loss of $1.2 million or $0.03 per share compared with a non-GAAP net loss of $6.4 million or $0.15 per share in the second quarter of 2025. Non-GAAP net loss in Q3 of 2024 was $2.1 million or $0.05 per share. On a GAAP basis, net loss in Q3 was $1.9 million or $0.04 per share. By comparison, net loss was $7.0 million or $0.16 per share in the second quarter of 2025. GAAP net loss in Q3 of 2024 was $2.9 million or $0.07 per share. The weighted average basic shares outstanding for Q3 2025 was 43.8 million shares.

Cash and cash equivalents and investments decreased by $3.9 million to $31.2 million as of September 30. By comparison, at June 30, it was $35.1 million. Accounts receivable increased by $11 million, so the delta in cash is explained in working capital. Depreciation and amortization in the third quarter was $2.3 million. Total stock comp was $0.7 million. Net inventory was down by approximately $2.4 million in the third quarter to $77.7 million. This continues to be a focus, and we expect to bring it down further in quarters to come. This concludes the discussion of our quarterly financial results.

Turning to our plan to list our subsidiary, Tongmei in China on the STAR Market in Shanghai. We've continued to keep our IPO application current. Tongmei remains in process as a part of a much more selective and smaller group of prospective listings than a few years ago. Although the current geopolitical environment is dynamic, Tongmei is considered a Chinese company and continues to be regarded in China as a good IPO candidate. We will keep you informed of any updates.

With that, I'll now turn it over to Dr. Morris Young for a review of our business and markets. Morris?

Thank you, Gary. This has been a very eventful quarter for AXT as we are seeing a strong uptick in indium phosphide demand from data center applications globally and as our industry and our customers adapt a new normal within a rapidly changing environment. In Q3, our revenue grew 56% sequentially and 18% year-over-year. Within this, our indium phosphide revenue grew to our highest level since 2022 as we were successful in obtaining export permits for a number of significant indium phosphide orders throughout the quarter. I'm very proud of the diligence our team and grateful for the partnership of our customers in working through the export control permitting process. Our current experience is that our indium phosphide permits are taking approximately 60 business days or approximately 3 months to be processed by China's Ministry of Commerce. This is a bit longer than our initial expectations, but customers are adapting to the requirements and are adjusting their ordering patterns to give us more visibility and longer lead times.

I should also note that the Golden Week holiday at the beginning of October in China will likely increase the average permit processing time by a week or so in Q4. The tremendous growth in demand for indium phosphide-based lasers and detectors for high-speed optical connectivity, coupled with our successful obtaining export permits on behalf of our customers are driving a strong increase in our indium phosphide order backlog, which as of today is more than $49 million and growing. Our established customers are planning for longer lead times by placing longer-term orders and giving us more visibility into their expected demand. We are also seeing active engagement with several Tier 1 -- new Tier 1 customers to qualify our material into their supply chains for the first time in many years. This include leading optical transceiver module makers, both in China and around the globe.

As many of you know, the supply chain for optical transceiver is quite complex and highly globalized. We believe this geographic interdependence is providing both opportunities and incentives for the ecosystem to work together in new ways to solve global supply chain shortages. For a geographic demand perspective, the massive AI infrastructure build-out and the planned CapEx spending by cloud services and AI platform providers in the United States is the primary driver for EML and silicon photonics-based optical transceivers. We believe that today, our materials are being used in multiple U.S. hyperscalers, and we expect that end customers' use will continue to broaden. In China, the data center build-out is early in its ramp, but there is a strong desire for domestic suppliers at every level of the supply chain, and we believe over the next 12 to 18 months, we will see healthy growth in the China data center market.

Data center expansion in China is quickly overtaking PON as the leading application in China for our indium phosphide substrates. Given the strong demand environment it is important to note that AXT is well positioned to handle increased demand. We have ample manufacturing capacity in place today, and we can also significantly increase our output by current level, and we can also add capacity quickly as needed. We also have a demonstrated ability to supply very low EPD wafers in volume that meet the vigorous requirements of next-generation EML and silicon photonics-based devices.

Now turning to gallium arsenide. Our revenue grew more than 20% from the prior quarter. The biggest driver was semi-insulating wafers for wireless RF devices, which remains a focused application for us. Industrial laser applications were about flat from Q2, and we saw an uptick in semiconductor wafers for data center laser applications. However, VCSEL lasers don't typically require a lot of gallium arsenide material, so they don't move the needle much as a growth driver. But they do require high-quality material, which we are well positioned to supply. In germanium substrates, our sales declined by about $1 million in Q3.

The germanium substrate market was very poor gross margin potential today. And while our material performed well in the solar cell applications as we supply, gross margin constraint dis-incentivize us to pursue many opportunities. In addition, certain customers prefer to source substrates outside of China. As such, we do not expect growth in germanium substrates in Q4. Finally, our raw material business in Q3 was consistent with the prior quarter and it was solidly profitable within a stable pricing market. We expect the same for Q4. Globally, there continues to be a greater awareness of the importance of earth materials, and we are ahead of the curve in developing this unique integrated supply chain.

In closing, this is a highly active time for our business. The receipt of indium phosphide and gallium arsenide export permits remains the single most significant gating factor for our growth. As such, we are highly focused on ensuring that we are proactive, organized and disciplined about managing the process on behalf of our customers. We also know that we must be laser-focused on running our business with the greatest efficiency. This includes our continued effort to drive gross margin improvement, OpEx discipline and inventory reduction. With strong ongoing market trends fueling the data center upgrade cycles, we believe we have tremendous opportunity in 2026 to drive meaningful growth in our business and a return to profitability. We look forward to reporting to you on our growth, on our progress.

With that, I will turn the call back to Gary for our fourth quarter guidance. Gary?

Thank you, Morris. To reiterate a couple of key points from Morris's commentary, we are seeing a strong increase in our indium phosphide wafer demand related to AI and the ongoing data center upgrade cycle. Given the geopolitical complexities surrounding this market trend, customer behaviors in our space are changing to allow for longer substrate lead times. our customers are placing longer-term orders and providing greater visibility into their needs. As such, our indium phosphide backlog has grown to $49 million and is the largest we've ever had in our history.

Further, we are actively engaging with new customers today that we have not had business with an opportunity for some time. With all of these positive market and AXT-specific growth drivers, the most significant gating factor in our growth in Q4 and beyond is the success and timing of getting export permits. Therefore, guiding for the future is somewhat tricky for us right now as we cannot predict future timing of permits or our success in obtaining them for any customer or individual order. But drawing on what we know and what we've experienced thus far in the export permitting process, we can offer the following insight into our expectations for Q4.

As of today, we have approximately $20 million in revenue that can be realized in Q4 across our substrate product lines and raw materials for which we either already have a permit to ship or for which an export permit is not required because it ships within China. We have a high degree of confidence in recognizing this revenue in Q4. In addition, we believe there's an incremental $7 million to $10 million in indium phosphide and gallium arsenide backlog, which is currently in our manufacturing process for which we believe we may be able to ship in Q4 if we are awarded permits. Of course, timing of permits is not within our control, but we believe we are in a similar or slightly better position in terms of customer order backlog and permit submissions than we were at the same point in the prior quarter.

As such, with that as a background, we believe we have the capability to achieve revenue in the range of $27 million to $30 million in Q4, subject to the caveats I just mentioned. This takes into consideration approximately flat sequential revenue contribution from germanium substrates and raw materials with incremental growth in Q4 likely coming from indium phosphide and gallium arsenide substrates. As Morris mentioned, we continue to focus strongly on gross margin, we made significant gains in Q3 and continue to work on our manufacturing efficiency. Further improvement in Q4 depends on a number of factors, including total revenue as it relates to the absorption of fixed costs, revenue mix by product and our ability to continue to drive better manufacturing efficiency.

With regards to OpEx, we expect that it will increase to approximately $9 million as a result of some incremental end of the year adjustments and a return to a more normalized level. With these factors in mind, we believe our non-GAAP net loss will be in the range of $0.01 to $0.03, and our GAAP net loss will be in the range of $0.03 to $0.05. This represents substantial year-over-year progress towards our return to profitability. We estimate the share count for Q4 will be approximately 43.8 million shares. And okay, this concludes our prepared comments.

We'll be glad to answer your questions now. Operator, Kelvin?

[Operator Instructions] your first question comes from the line of Charles Shi of Needham & Co.

Maurice, Gary, congrats on receiving the licenses, the permits shipping $8 million additional revenue in the quarter, and congrats again on the $49 million backlog. That was an exciting number to hear. I really want to get back to this point on the customer behavior change, like are they placing longer-term orders. But I think if I hear you correctly, some of those customers may not necessarily have the permits at this point and still proceeded to place the orders with you, a pretty significant amount of orders with you. Can you kind of talk through what exactly is driving that behavior? And what do you think the export permits, currently -- the current ones you already have, are there time limits to that? Are there like the volume limits to that? And what could be your best prediction going forward from here, the customer behavior can continue to evolve?

Yes. Thank you, Charles. So we have, as you say, $49 million backlog. That includes customers that have previously received permits and customers that are still in the permit phase for the first permit as we go through. Everybody that has previously received a permit has typically received subsequent permits from there. So there's a lot of confidence in getting further permits as we move forward through this. So people are placing orders into that backlog with the understanding that the confidence levels of receiving permits are high, especially for indium phosphide. So as we look forward and as we look at that backlog, all of the orders that we've received and put into backlog have permit applications in place so far. And we manage that backlog and those permit applications, and we manage the manufacturing process so that we can combine the expected permit approval time with the finishing of the product. So our lead time to ship the product after receiving the permit is very low.

Yes. So maybe I can add another point. I hear Charles is asking why? Is there any relationship with customers giving us a lot more order, a longer order lead time? Is it because we have a permit process? I think that is true. People realizing instead of just in time, they want to give us a long lead time to submit the permit application so that we can ship this product to them in time. Is that a part of the question, Charles?

Yes. I think maybe a better way to help us understand what the permit to the size of the orders, how much long term the orders is going to be? Maybe you can shed some light on, let's say, the order currently on average cover is it like 1-year demand, 2-year demand, 3-year demand? What do you see there? Like how long does the order you have in the backlog covers what customers demand?

Right. Okay. Understood. Thanks, Charles. So the permit, we apply for a permit and it can be for multiple shipments, number of shipments up to 12. This is the important part. The permit only lasts 6 months. So everything has to be shipped within 6 months of receiving the permit.

Yes. And the other point is this, our customers are telling us, we give you this order, if you get the permit and if you can manufacture it, you can ship it tomorrow.

So when Tim mentioned up to 12, that means 12 line items. Every PO needs a separate permit. So if you put each line item on a separate PO, then we need 12 permits. It's complicated as they say in the show business.

It is, it is. So maybe I ask another question on profitability. So when you were at this revenue level in the high 20s, going back a few years, you probably have a gross margin somewhere in the high 20s or even low 30s percent and you would have a non-GAAP EPS in the positive territory. But I think, Gary, if I hear you right, I think you're still expecting some gap -- some non-GAAP loss in the coming quarter. And wonder if there's anything in your cost structure that's a little bit different now versus back then? And how do we get back to like the similar profitability level at the similar revenue run rate back in the, let's say, go back -- only go back 2 or 3 years, yes.

Yes. We expect it to be asked that question to us. So -- and this is something that we talk about internally. So as I like to say to ourselves and to analysts and investors, in our business model, it's never one single dial. It's not like one thing we can focus on, and we have to focus on 2 to 4 things to sort of move the needle in the right direction. In this regard, one of the things we need to get improvement on is gross margin. And that's primarily a result of mix, which is going in our favor right now and also efficiencies on the line. So we have -- I'm actually encouraged to be able to say this because it's pretty much in our control. And we've done better than we're doing right now. But this is -- it is common in manufacturing businesses to have some cycles. And so I think we can work on that and focus on it and get improvement. That's probably the biggest one. I think we could get a bit more help from our joint venture companies. I expect that to improve in the coming quarters as well. But those are the two things that come to mind.

So Charles, maybe I can answer part of the other question. I think the deadliest thing in manufacture, I think analysts should ask is, is your ASP dropping, okay? I think we can say except with the low end on the 2-inch indium phosphide, most of our ASPs are holding very firm. In fact, some of the ASP for our high-end low EPD indium phosphide substrate, the ASP is increasing. okay? So I think we can surely stop that worry. I mean we have some other efficiency issues such as loading factors, germanium is perhaps not making a whole lot of money for us because the pricing pressure is very strong. But the main focus on indium phosphide, the pricing is firm and the demand is high.

I think maybe one last question before I jump back into the queue would be the indium phosphide demand you are seeing today, how much of that is from the overseas customers that would need a permit versus domestic Chinese customers? And if I recall correctly, I remember that the indium phosphide was primarily shipped to outside of China previously. How much of the domestic development today maybe has led to a little bit more of a domestic shipment of the indium phosphide. If you can kind of paint a little bit of picture to us of how things have been evolving, that would be great.

Well, actually, indium phosphide business is very globally connected. A lot of our substrates are shipped to, let's say, Taiwan to put EPON and ship back to United States to make a device and ship back to China to make a transceiver and then ship back to U.S. data centers. So I think -- but our direct customer in China is roughly, I would say, 40%. But the great AI opportunity definitely is the big increase is in the AI data center in the United States.

And I think I can add to that as well. If you look at our financials from Q2 versus Q3, you can see that the indium phosphide in Q2 was about $3.5 million, and that's increased to about $13 million in Q3. So that kind of gives you an idea of what the incremental is and all of that incremental has come from outside of China.

Your next question comes from the line of Richard Shannon of Craig-Hallum.

I'll offer congrats on a wonderful quarter. Great to see. So congrats to the entire team for making that happen here. Let's start with the first question here on the indium phosphide backlog. I just want to understand the dynamics here. Maybe if you can help us understand a few things here. What was the backlog a quarter ago? And then how far out are customers ordering here? I would imagine, given one of the prior answers you're talking about a permit allows you to ship for 6 months that they're probably going out 6 months here, but just want to get a sense of what this looks like and how it's changed.

Yes. So as Morris has previously said, those permits do last 6 months, but most of our customers are asking to ship as soon as we can. So that backlog -- once we have a permit, we can ship that backlog as quickly as we can manufacture, to be perfectly honest. So in terms of our backlog last quarter, we've got more than double the backlog in -- as we speak today than we had last quarter. So that continues to grow. And as we said in the conference call, we're seeing more and more new opportunities coming. So that backlog is growing daily as we speak.

Maybe I can chime in a bit. I think as CEO, I take care a lot of this China development, engineering and manufacturing and also my duty is to push the IPO process in China. But recently, I got putting more and more to talk to customers of indium phosphide because they cannot get enough material, they call my sales guys and the sales guy says, well, you got to come and visit the customers to calm them down. How are we opening up the opportunity to supply indium phosphide customers. So I got a lot this very good warm receptions from our customers and sometimes the customers' customer and also the end user. So in other words, the epi growers, the device makers as well as the CPU, GPU makers.

In fact, I got the message from our customers, especially globally, not especially, they all told us that we are a very important supplier of indium phosphide. Secondly, they all told me there's a great, great opportunity to increase the demand in the near future. Obviously, they are all anxious to know what are we going to do to ease the pain of getting the permits to export material. And lastly, quite a few customers told us they start to appreciate the better EPD or the better quality of indium phosphide material we supply. In fact, one customer told me that now every die count and using our substrates, they can make better die yield on their lasers or detectors. So I think that's a very warming information for me and also telling us that indium phosphide, the paradigm -- there's a paradigm shift because of the global increased demand for AI connectivity in optical transceivers. And what's the other words, CPOs?

CPOs.

I'll start to learn that one.

Okay. That is helpful. I'm going to explore a couple of different angles on the dynamic here. So I think one of the things that investors will be worried about or cognizant of here is customers understanding the geopolitical dynamics, as you referenced in your prepared remarks and worried about the door shutting here at any point, very well could be ordering well above what their normal rates of consumption would be and building some level of inventory. To what degree do you see that behavior anywhere here in the backlog build? And what are the limits to your shipping faster? Are you near full utilization in your indium phosphide today?

So let me start by answering the dynamic question. I think the fact of the matter is that people are building inventory levels so that they have inventory on hand. But I don't think this is a onetime build-out because they're concerned. This is a multiyear cycle. So the demand today that we're seeing is real, and you can see evidence of that all up and down the supply chain for optical transceivers, right? I want to really just look at some of the CapEx spending messaging that was given from U.S. hyperscalers on their earnings calls yesterday, right? So everybody is talking about CapEx moving faster and growth in dollars getting noticeably larger as we go through financial year '26.

So there's definitely growth going on here at the hyperscale level, and we're seeing that come into here. We're also seeing longer-term discussions on indium phosphide for CPO, both on scale up and scale across now. So the demand is there. The demand is real. And of course, people are building backlog -- or sorry, people are building inventory levels, but those inventory levels will continue to grow. So we don't see this as a one-and-done shot.

Yes. So let me add on to another point. Yesterday, Tim and I were in the valley visiting a few actually customers' customers. They are asking me what can they help in terms of financially, in terms of customer relationship to ensure that indium phosphide will be supplied. In other words, they are telling me there's a tsunami coming, okay? I just don't know how big the tsunami is because the normal rate, let's say, if it is one foot wave, then tsunami is only 10 feet. It's not that big. But if the normal wave is already 5 feet, then that's going to be very significant. So we're going to get that information soon. But I think the demand from what I hear is enormous. And don't forget, Richard, we are 40% of the indium phosphide supply chain, and we have the best quality material.

By the way, tsunami was used by the customer that Morris and Tim were visiting. We're not making it up in our conference room. So I was struck to hear that word as a description of what's on the future. So...

Okay. Now let me ask one -- another question here looking on the other side of this dynamic here, which is you mentioned a number of engagements with customers you've not worked with ever or for a very long time here. I think, Morris, you've been talking about the very good EPD specs on indium phosphide for a few years at least. And we haven't heard you talk about new customers really much, if at all. And I know I've asked on this conference call a few times in the last few years on this topic. Why is it there all of a sudden coming to you now? It seems like it's a unique or, I guess, a coincidental timing to see a number of customers coming to you at this particular time. What's going on here and what's driving that?

Jeez, you're so smart. I mean you call me. But I tell you, I have a perfect answer to that. That is, first of all, I think with all these lasers getting bigger and bigger, the EPD is getting that much more because the larger the device, the chances of you hitting a EPD is higher. In fact, yesterday, I was told by one of the customers, how come you guys can make the EPD so low, right, Kim?

Right, right. And I think the market is maturing such as well. And the demands that our customers are being faced with, with increased demands, increased capacity, one of the customers said to us, every device is important. The yield of devices on a wafer has become so much more important today than it ever has been, both because of cost and capacity constraints within the fab. So people are turning to us because they get much higher device yields from our wafers.

Yes. That's the customer told us straight in the face, they wouldn't tell us because we would have to ask higher price.

Richard, a secondary factor subservient to what Morris and Tim just described is there is a concern among the customer base about capacity and capacity potential. They're sensing that there are shortages, and we are the best positioned currently with capacity and with the ability to respond quickly to add capacity.

Well, Gary, that was a perfect setup for my next question here, which is on a full run rate basis, hand-to-mouth basis here, what is your kind of maximum indium phosphide revenues per quarter here? And how long would it take you to get a new capacity? And what kind of CapEx commitment to grow it by, I don't know, say, 25%? How does that look like?

Well, we could double our capacity on indium phosphide in about 9 months' time. It would take us about my estimation is -- because this is not a greenfield. We got the clean room already. We got land already and all we need to do is add a few crystal balls. So my estimation is about $10 million to $15 million. But we need a signal, I'm getting it.

So let me answer the question on current capacity there, Richard. So it's a complex question because it depends on a number of factors relating to product mix and wafer size and inventory on hand and all that kind of stuff. But we estimate that current capacity is around about $20 million a quarter for indium phosphide with our current run rate and current capacity that we've got. You asked how quickly can we increase by 25%? Probably within about 3 months, we can increase by 25%. We do not need to build anything other than bring some more furnaces online.

And to add for us to double that, then we need 9 months. That will be [indiscernible].

Your next question comes from the line of Tim Savageaux with Northland Capital Markets.

Again, congrats on that backlog number. Believe it or not, I still have a few questions. And I guess the overall question is, guys, is doubling capacity, is that a tsunami? Or is that just good business?

That's a good question, but I think I'll be happily retiring when the capacity is double with all the better gross margin. I'm joking. I think it's a lot more than that. I think -- but one step at a time, I think if we can double that, and I think we have all the ability to increase our capacity, well, the easiest way is in China. But I think beyond that, we may want to consider building something.

Yes. U.S.-based capacity would make a lot of sense. And yes, I think just intuitively, a tsunami is like 5 to 10x. And I have heard numbers like that in the industry in terms of where demand is going to be. And it sounds like the tsunami referenced in particular, is that a specific kind of looking forward scale up, scale across comments, which is to say, I assume what you're seeing in terms of current demand is likely module-driven, might be some early CPO, you tell me. But in terms of the real big step function in capacity, is that discussion mostly CPO-based or scale-up type based?

Yes, that's absolutely right. So we are seeing growth right now. That is, we believe, in the pluggable market and probably will continue to be in the pluggable market for the next few years. But we are starting to have those discussions now about growth rates for CPO for scale up. And the tsunami, the 5, 10x that you talk about, that is a lot of that is coming from CPO for scale up.

Yes.

Sorry Morris, you were saying something.

No, I'd say yes. Yes, I like...

The question -- I'll add to the -- just trying to get a sense of this backlog. So you increased your backlog, you doubled it and shipped $13 million in material, which I think gives you a book-to-bill that's approaching 3, so that's not bad. But where would that kind of normally be? I guess -- and so maybe as opposed to go back to last quarter, let's go back to last year or just historically without export permits required, what kind of backlog would you normally have in terms of quarters of revenue or just straight up, where was that indium phosphide backlog Q3 '24.

Well, because we could be responsive to customer orders, we had a lot of turns business every quarter. So to be honest, we don't really -- in terms of me and Morris and Tim, we don't manage the company by looking at a book-to-bill. Well I have in other companies, but it's not very meaningful in this case. But -- so it's hard to say what it was because I don't have a piece of paper in front of me with that list because there's no such list.

Got it. Well, it sounds like it should be some fraction, maybe half or 1/3 of whatever your indium phosphide revenue was a year ago. Your backlog is tsunami. It's up 10x, right?

Yes. And again, tsunami was not -- I agree with you, tsunami is 5 to 10x. And I'll say again, that was not our words. That was the words from an end customer. So...

Yes. Okay. Last one for me. You mentioned two 10% customers in the quarter. And Morris, you talked about kind of industry structure, epi Tier 1 back to the U.S. But any color on whether you've got an integrated device maker in there? Is this just really focused on epiwafer suppliers or whether you might have a new 10% customer in there?

Tim?

Yes. We've -- so the 10% customers that we've got, we've been dealing with for a while. The new customers that we've got are integrators as well. We're dealing more and more with integrators and hardware customers.

Including GPU and CPU makers.

Exactly right. So we're dealing with -- directly with GPU, CPU hardware makers. We're dealing with pluggable makers. So we're having -- that's where really the visibility is coming from.

Yes. I would say in the past, we haven't had access to those people. But now they're calling us. They want to see us. So that's why we had better visibility.

Your next question comes from the line of Matt Bryson of Wedbush Securities.

This is going to sound a little bit like a complaint, but it's not a complaint. Just curious, so there's clearly a whole lot of demand out there. Your Japanese competitor has announced 2 capacity increases in the last, I think, 4 months, 3 months. Just curious, if you have all this backlog and your customers want more product faster, why wouldn't you be building and shipping to capacity next quarter or this quarter?

Well, all of our shipments, all of our ability to ship is based on permitting. So we -- as we've talked about plenty of times, we've got a large backlog now, and we can ship as -- we've been told by customers, we can ship as quickly as we possibly can. But we have to go through the permitting process. Now that permitting process, it takes 60 business days, which is approximately 3 months. And there is some opaqueness to that permitting process. So if we had a bunch of permits today, I'm sure we could ship an awful lot more of that backlog today. We've guided at $27 million to $30 million. If we got permits, could we ship more than that? Yes, we could. But we're basically running trend analysis on how long it takes to get permits and a probability analysis of what permits we're going to get, and that's where the guidance comes in.

By the way, we're not standing still on those orders that we are applying for permits, we are putting that into WIP. In other words, we are making it, and we're packaging it and waiting for the permits to be issued and then we can deliver right away.

Got it. Understood. So I mean, it comes down to the permits of the gating factor, but as hopefully, permit approvals continue to get across the line and lift, there's a path to achieving the levels of shipments that you were at a few years back during COVID? And then I guess, what's -- in terms of gross margins, obviously, when you're running back at close to full capacity back then, you had substantially higher gross margins. I guess what's key to getting gross margins back up? Is it predominantly utilization? Or were you benefiting back then from higher pricing? Can you just talk to kind of the dynamics around gross margins, where they can go to from here if you can get indium phosphide back up to full utilization?

Yes. Pricing is not really a big factor. I think the big factor is volume because it does carry more of the fixed assets in a proper way. And -- and then it's -- I'm confident we can return -- we're going to be over 30% because there's -- we can control that. So we need to improve the efficiencies on the line, but I already commented on that. So I see it going in that direction.

I think the most important factor is we got more -- we can utilize our indium phosphide line. I think that's the greatest opportunity we're facing now.

[Operator Instructions] there are no further questions at this time. And with that, I will turn the call back to Leslie Green for closing remarks. Please go ahead.

Thank you, everyone, for participating in our conference call. We will be participating in the Northland Virtual Conference in December and the Needham Growth Conference in January, and we hope to see many of you there. As always, feel free to reach out to any one of us if you would like to set up a call, and we look forward to speaking with you in the near future.

Ladies and gentlemen, this concludes today's call. We thank you for participating. You may now disconnect.